ENCLOSURE GP-GENERATOR 1599965 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     4    
Disconnect the harness assembly for the lights, if equipped.
Illustration 1 g00812049
Illustration 2 g00812050
Attach Tooling (A) and a suitable lifting device to the Rollover Protective Structure (ROPS) (1), as shown.
Remove bolts (2) from both sides of ROPS (1). Remove bolts (4) from both sides of ROPS (1) .
Remove ROPS (1) from operator platform (3). The weight of the ROPS is approximately 325 kg (717 lb).Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     4    
Illustration 3 g00812049
Illustration 4 g00812050
Use Tooling (A) and a suitable lifting device to position the Rollover Protective Structure (ROPS) (1) on operator platform (3), as shown. The weight of the ROPS is approximately 325 kg (717 lb).
Install bolts (2) on both sides of ROPS (1). Install bolts (4) on both sides of ROPS (1). Remove Tooling (A) and the suitable lifting device.
Connect the harness assembly for the lights, if equipped.