ENCLOSURE AS 2319364 - Caterpillar

2319364 ENCLOSURE AS Caterpillar parts 434E, 444E

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2319364
231-9364
2319364

Weight: 7 pounds 3 kg.

Buy ENCLOSURE AS 2319364 Caterpillar genuine, new aftermarket tractor parts with delivery
BACKHOE LOADER,

Compatible equipment models: 2319364:

BACKHOE LOADER 434E 444E Caterpillar

Number on catalog scheme: 4

Caterpillar 2319364 Parts scheme ENCLOSURE AS

For full view, you need register

Information:

Illustration 1 g00758873
System Response:The ECM will log the derate. The ECM derates the engine power by a maximum of 35 percent. The ECM will restore full power when the engine oil pressure rises above the reset line for two seconds.
Low power
There may be a problem with the engine lubrication system.
There may be a problem with the engine oil pressure sensor.Test Step 1. Check for Diagnostic Codes.
Connect ET to the service tool connector.
Turn the keyswitch to the ON position. The engine should be off.
Check for any active diagnostic codes or logged diagnostic codes.Expected Result:There should be no diagnostic codes that are present.Results:
OK - Proceed to Test Step 2.
Not OK - Repair: Repair the diagnostic codes that are present. Refer to the appropriate topic in the "Troubleshooting With a Diagnostic Code" section of this manual.Ensure that the repair eliminates the problem.STOPTest Step 2. Perform a Check of the Engine Lubrication System.
Perform a check of the engine lubrication system. Refer to Troubleshooting, "Low Engine Oil Pressure".Expected Result:There are no problems with engine oil pressure.Results:
OK - There may be an intermittent problem.Repair: Monitor the operation of the engine.Repair the problem.Ensure that the repair eliminates the problem.STOP
Not OK - Repair: Repair the problem.Ensure that the repair eliminates the problem.STOP