ENCLOSURE GP-POWER SUPPLY 2444981 - Caterpillar

Illustration 32 g00774577
Install bearings (17) .
Illustration 33 g00774575
Install gears (16) .
Illustration 34 g00774566
Install ring (15) .
Illustration 35 g00774491
Install screws (14). Tighten the screws to a torque of 6.1 2.0 N m (54 18 lb in). Install sun gear (13) .
Illustration 36 g00931212
Install bearing races (12) .
Illustration 37 g00774487
Install carrier (11) .
Illustration 38 g00774486
Install bearings (10) .
Illustration 39 g00774482
Install gears (9) .
Illustration 40 g00774480
Install gear (8) .
Illustration 41 g00931206
Install plate (7) .
Illustration 42 g00931199
Note: Put a light coat of oil on the O-ring seal before installing the cover. The oil will allow the cover to turn freely.
Install O-ring seal (6) .
Illustration 43 g00931197
Install cover (1) .
Illustration 44 g00775832
Install Tooling (F) and Tooling (G) .
Illustration 45 g00931088
Bend wire (5) by 90 deg °. Put the wire through opening (4). Feed the wire into the groove in the housing. Use Tooling (F) and a socket wrench in order to turn cover (1). Feed the wire until the wire appears at opening (4) .
Illustration 46 g00931196
Illustration 47 g00931197
Install plug (1A), plug (2), plug (3), plug (4), and the O-ring seals.End By: Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".