ENCLOSURE GP-GENERATOR 2483055 - Caterpillar

Illustration 3 g00746868
Remove input hub (4).
Illustration 4 g00746869
Remove clutch plates (5) and friction discs (6) from hub assembly (7).
Illustration 5 g00746870
Illustration 6 g00746872
Remove piston (8) from hub assembly (7).
Remove sleeve bearing (9).
Remove seals (10) and (11) from piston (8).
Illustration 7 g00746873
Turn over the brake assembly.
Remove ring (12) from hub assembly (7).
Illustration 8 g00746874
Fasten a suitable lifting device and Tooling (A) to housing (13), and remove the brake assembly from hub assembly (7). The weight of the brake assembly is 86 kg (190.0 lb).
Illustration 9 g00746875
Remove bearing (14) from housing (13).
Illustration 10 g00746876
Remove three rings (15) from hub assembly (7).
Remove bearing (16) from hub assembly.
Illustration 11 g00746877
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: Bolts (19) hold a spring under compression behind the piston. It is important to remove bolts (17) before removing bolts (19).
Remove bolts (17) and plate (18) from housing (13).
Illustration 12 g00746878
Remove brake plates (20) and friction discs (21) from the housing.
Illustration 13 g00746879Note: Bolts (19) hold a spring under compression. Loosen bolts (19) slowly and loosen bolts (19) evenly.
Remove bolts (19) and the manifold assembly (22) from housing (13).
Illustration 14 g00746880
Remove seals (23) and (24) from manifold assembly (22).
Illustration 15 g00746881
Remove piston (25) from housing (13).
Illustration 16 g00746882
Remove springs (26) from housing (13). Note: Note the direction of spring (26) before removing.
Remove O-ring seal (27) and (28).