ENCLOSURE GP-ELECTRICAL 4805002 - Caterpillar

4805002 ENCLOSURE GP-ELECTRICAL Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4805002
480-5002
4805002

Caterpillar 4805002 ENCLOSURE GP-ELECTRICAL

Buy ENCLOSURE GP-ELECTRICAL 4805002 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

48 x 5.00 Metric Hand Tap - Bottoming, High Speed Steel / Ground Thread

$127.92

03 Jul 2022

US: Machine Shop Di

48 x 5.00 Metric Hand Tap - Bottoming, High Speed Steel / Ground Thread
Star USA Size: 48.0MM Pitch: 5.00MM

$130.60

03 Jul 2022

US: Industrial Boys

48.0mm-5.00mm HSS Metric Bottoming Tap
Meda - Superior Import High Speed Steel || Ground Thread || Metric Hand Tap || Bottoming (1-2 Thread Chamfer) * Designed for threading near the bottom of blind holes. * Hand taps are the most commonly used general purpose tap. They are recommended for tapping free machine steels, stainless steels, aluminum, zinc, and ductile material. Hand taps are utilized in either through or blind hole tapping.

Number on catalog scheme: 11

Caterpillar 4805002 Parts scheme ENCLOSURE GP-ELECTRICAL

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 1
B 180-3032 Stand 1
C 132-8223 Power Pack 1
1U-6221 Hydraulic Torque Wrench Assembly 1
1U-6222 46mm Hex Link 1
D 183-4799 Track Roller Lifting Fork 1 Note: The procedure to install any of the track carrier rollers is identical. The procedure that follows is for one of the track carrier rollers.
Make sure that the shaft of the track carrier roller and the bore in the mounting bracket are clean and free of dirt.
Illustration 1 g00597229
Use Tooling (D) and a suitable lifting device in order to lift track carrier roller (2). The weight of track carrier roller (2) is approximately 57 kg (125 lb). Carefully position track carrier roller (2) to the mounting bracket.Note: Be sure that track carrier roller (2) is centered between the track links.
Illustration 2 g00597213
Illustration 3 g00597221
Use Tooling (C) in order to tighten bolt (1) to a torque of 1000 125 N m (740 90 lb ft).
Illustration 4 g00597205
Use Tooling (A) in order to lift the track assembly. Remove Tooling (B). Lower the track assembly onto the track carrier roller. Remove Tooling (A) .
Illustration 5 g00595011
Personal injury or death can result from grease and oil coming out of the relief valve.Grease and oil are under high pressure coming out of the relief valve and can penetrate the body.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track.
Tighten relief valve (1) for the track adjuster. Adjust the tension of the track assembly. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".