ENCLOSURE GP 4839173 - Caterpillar

Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00471086
Install piston (14), clips (17), washers (16) and three bolts (15) .
Illustration 2 g00471085
Install piston (9), springs (10) and (11) and clip (12) on three locations on the Compression Brake. Install three retaining rings (13) .
Illustration 3 g00471084
Install piston (8), springs (3) and (4), spacer (5), cup (6) and snap ring (7) .
Illustration 4 g00471083
Note: If the O-ring seals are worn or damaged, use new parts for replacement.
Install the O-ring seals. Install oil tubes (1) and (2) .End By: Install the Compression Brake. Refer to Disassembly and Assembly, "Compression Brake - Install".