ENCLOSURE GP 9W3721 - Caterpillar

Features/Benefits
* Used to accurately set engine valve lash with factory setting methods.* Installation of tools is quick and easy with adjustment of indicator position required on initial set-up only.* Removal of fuel lines not necessary to measure valve lash.* Adding 147-2058 Extension to indicator allows valve lash to be measured on Magneto Gas engine without removing spark plug extension.* Socket and torque wrench used to torque rocker arm nuts are preset at factory to 70 N m (52 ft.lbs.) - weight of torque wrench alone sets value of valve lash* Valve bridge adjustment can be made without removing the rocker arm. Use the 147-5536 Contact Point, 147-2058 Extension and 148-7211 Socket to make the adjustment.* A slide rule type torque computer, Form SEHS7150, is available to determine torque wrench dial reading for different extensions.* This tool will not fit on some early 3500 Engines with old fuel manifolds.* Dial Indicator is not included in group - choice of 147-2056 (in) or 147-5537 (mm) is available .
147-5482 Valve Lash Adjustment Group(1) 145-5191 Support Assembly.(2) 147-5536 Contact Point.(3) 147-2057 Contact Point.(4) 147-2058 Extension.(5) 148-7211 Bridge Nut Socket. Not shown: 6V-3073 Plastic Case147-5535 Foam BlockRequired tooling not included in 147-5482 - must be ordered separately: (6) 147-2056 Indicator, Dial (inch) preferred or 147-5537 Indicator, Dial (metric). Recommended tooling not included in 147-5482 - must be ordered separately:(7) 147-2060 Socket Wrench. (8) 147-2059 Torque Wrench. Reference: Special Instruction; REHS0128; Using the 147-5482 Indicator Guage Group For Valve Lash And Valve Bridge Adjustment.