4J8723 END BIT (RH) Caterpillar parts
9A, D9G
Rating:
Alternative (cross code) number:
CA4J8723
4J-8723
4J8723
CA4J8723
4J-8723
4J8723
Weight: 91 pounds 41 kg.
BULLDOZER, TRACK-TYPE TRACTOR,
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Drain the engine lubricating oil into a suitable container. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
If necessary, remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Illustration 1 g01343557
Typical example
Illustration 2 g01343558
Tightening sequence for the engine oil cooler
Loosen fasteners (7) in reverse numerical order to the sequence that is shown in Illustration 2. Remove fasteners (7). Support the assembly of engine oil cooler (1) as the fasteners are removed. Note: fasteners (7) are different lengths. Note the correct position of the fasteners. Note the position of any brackets that are secured by the fasteners. Do not remove fasteners (6) at this time.
Remove the assembly of oil cooler (1) from the cylinder block.
Remove joint (2).
Follow Steps 7.a through 7.c in order to disassemble the engine oil cooler.
Remove bolts (6).
Remove cooler matrix (3) from housing (5).
Remove joints (4).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Drain the engine lubricating oil into a suitable container. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
If necessary, remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Illustration 1 g01343557
Typical example
Illustration 2 g01343558
Tightening sequence for the engine oil cooler
Loosen fasteners (7) in reverse numerical order to the sequence that is shown in Illustration 2. Remove fasteners (7). Support the assembly of engine oil cooler (1) as the fasteners are removed. Note: fasteners (7) are different lengths. Note the correct position of the fasteners. Note the position of any brackets that are secured by the fasteners. Do not remove fasteners (6) at this time.
Remove the assembly of oil cooler (1) from the cylinder block.
Remove joint (2).
Follow Steps 7.a through 7.c in order to disassemble the engine oil cooler.
Remove bolts (6).
Remove cooler matrix (3) from housing (5).
Remove joints (4).
Caterpillar parts catalog:
Parts end Caterpillar catalog:
12E, 14E, 16, 163, 173B, 191, 235, 235C, 235D, 245, 245B, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 508, 517, 5230, 5230B, 527, 561B, 561C, 561D, 561H, 571G, 572G, 583H, 583K, 589, 5...
120, 120B, 120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14E, 14G, 14H NA, 16, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G,...
9S7634
END
D9G, D9H
D9G, D9H
2P9005
END
D9G
D9G
4M4064
END
D9G
D9G
4J8724
END BIT (LH)
9A, D9G
9A, D9G
1J8489
END
140, 141, 153, 163, 183, 191, 572G, 583H, 594, 814, 824, 824B, 824S, 825B, 834, 950, 955H, 955K, 955L, 966C, 977H, 977K, 977L, 983, 983B, 988
140, 141, 153, 163, 183, 191, 572G, 583H, 594, 814, 824, 824B, 824S, 825B, 834, 950, 955H, 955K, 955L, 966C, 977H, 977K, 977L, 983, 983B, 988
1409637
END-YOKE ROD
D6G2 LGP, D6G2 XL
D6G2 LGP, D6G2 XL
8T4968
END-YOKE ROD
561M, 938G II, 938H, 950G II, 950H, 950K, 962G II, 962H, 962K, 966G, 966G II, 966H, 966M, 966M XE, 972G, 972G II, 972H, 972M, 972M XE, D5M, D6M, IT38H, IT62H
561M, 938G II, 938H, 950G II, 950H, 950K, 962G II, 962H, 962K, 966G, 966G II, 966H, 966M, 966M XE, 972G, 972G II, 972H, 972M, 972M XE, D5M, D6M, IT38H, IT62H
1123862
END AS-ROD
D5M, D5N
D5M, D5N
4S, 5S, 6A, D4E, D5B
9006A
END
12E, 561C, 955C, D6C, D9G
12E, 561C, 955C, D6C, D9G
906A
END
12E, 14E, 561B, 583H, 594, 955C, 977H, 977K, D6C, D8H, D9E, D9G
12E, 14E, 561B, 583H, 594, 955C, 977H, 977K, D6C, D8H, D9E, D9G
8M5313
END
824, 955H, 955K, 977H, 977K, D4D
824, 955H, 955K, 977H, 977K, D4D
141, 163, 191, 983