END BIT 5F3039 - Caterpillar

Illustration 1 g01349654 (1) Maximum free running torque of the adjustment screw ... 0.4 N m (4 lb in) (2) Torque for the hex thin nut ... 55 10 N m (41 7 lb ft) (A) Oil passage angle ... 13 degreesNote: Opening diameter for the oil hole must be 2.3 mm (0.09 inch) minimum after the assembly of the bearing. (B) Bearing bore diameter ... 34.050 0.015 mm (1.3405 0.0006 inch)Bore in the rocker arm for the bearing ... 37.000 0.020 mm (1.4567 0.0008 inch)Note: The bearing in the rocker arm must not extend beyond either face of the rocker arm. (C) Oil passage angle ... 20 degreesNote: The diameter for the oil hole opening must be 2.3 mm (0.09 inch) minimum after the assembly of the bearing.