5J8770 END BIT (L.H. 1.125" TH.) Caterpillar parts
8A, 8U
Rating:
Alternative (cross code) number:
CA5J8770
5J-8770
5J8770
CA5J8770
5J-8770
5J8770
![Caterpillar 5J8770 END BIT (L.H. 1.125" TH.)](https://storage.googleapis.com/a2109_c1_300/p/caterpillar/end/5j8770.png "Caterpillar 5J8770 END BIT (L.H. 1.125" TH.) parts catalog")
Weight: 2 pounds 1 kg.
BULLDOZER,
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Place an index mark on all of the electrical wires that are connected to the electric starting motor. Disconnect the electrical wires from the electric starting motor.
Illustration 1 g00652039
Fasten a suitable lifting device to the electric starting motor. The electric starting motor weighs approximately 27 kg (60 lb).
Remove three bolts (1) and the washers.
Remove the electric starting motor.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00652039
Fasten a suitable lifting device to the electric starting motor. The electric starting motor weighs approximately 27 kg (60 lb).
Position the electric starting motor in the flywheel housing. Install three bolts (1) and the washers.
Connect all of the electrical wires to the electric starting motor by using the index marks.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Place an index mark on all of the electrical wires that are connected to the electric starting motor. Disconnect the electrical wires from the electric starting motor.
Illustration 1 g00652039
Fasten a suitable lifting device to the electric starting motor. The electric starting motor weighs approximately 27 kg (60 lb).
Remove three bolts (1) and the washers.
Remove the electric starting motor.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00652039
Fasten a suitable lifting device to the electric starting motor. The electric starting motor weighs approximately 27 kg (60 lb).
Position the electric starting motor in the flywheel housing. Install three bolts (1) and the washers.
Connect all of the electrical wires to the electric starting motor by using the index marks.
Caterpillar parts catalog:
Parts end Caterpillar catalog:
7A, 7S, 824S, 834B, 8A, 8U, D7G
7A, 7S, 824S, 834B, 8A, 8S, 8U, D7G
8A, 8S
2J2571
END BIT (R.H.)
7A, 824S, 8A
7A, 824S, 8A
2J2572
END BIT (L.H.)
7A, 824S, 8A
7A, 824S, 8A
8A, D8L
9J1539
END BIT (R.H.) (Penetration)
8A, 8S, D8L
8A, 8S, D8L
5S, 6A, D5B
5S, 6A, D5B
6A, 6S
6A, 6S
8J6171
END ASSEM.
955K, 955L, 977K, 977L, 983, 983B
955K, 955L, 977K, 977L, 983, 983B
1J6950
END
9A
9A
3J5270
END
9A
9A