7B6059 END-YOKE ROD Caterpillar parts
561B, 977D, D6C, D6D, D6E SR, D7F, D7G
Rating:
Alternative (cross code) number:
CA7B6059
7B-6059
7B6059
CA7B6059
7B-6059
7B6059
Weight: 0.60 pounds 0 kg.
Information:
HOLE DIAMETER
15.875
mm
LENGTH TO CENTERLINE OF HOLE
68.263
mm
THREAD LENGTH
0000031.6870
mm
THREAD SIZE
.62-18
TYPE
STRAIGHT
EXTERNAL YOKE WIDTH
42.863
INTERNAL YOKE WIDTH
25.4
PIPELAYER, TRACK-TYPE TRACTOR,
Compatible equipment models: 7B6059:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01292755
Remove bolts (1).
Remove fuel priming pump (2) and the gasket. Installation Procedure
Illustration 2 g01292755
Position the gasket and fuel priming pump (2) on the fuel filter base.
Install bolts (1).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01292755
Remove bolts (1).
Remove fuel priming pump (2) and the gasket. Installation Procedure
Illustration 2 g01292755
Position the gasket and fuel priming pump (2) on the fuel filter base.
Install bolts (1).
Caterpillar parts catalog:
Parts end Caterpillar catalog:
12E, 14E, 16, 163, 173B, 191, 235, 235C, 235D, 245, 245B, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 508, 517, 5230, 5230B, 527, 561B, 561C, 561D, 561H, 571G, 572G, 583H, 583K, 589, 5...
120G, 12E, 12G, 130G, 140, 140G, 141, 14G, 153, 16, 160G, 163, 16G, 191, 215, 215B, 215C, 215D, 518, 518C, 528, 528B, 530B, 561C, 561D, 571G, 572G, 583H, 583K, 666, 904H, 943, 950, 951B, 953C, 955H, 9...
3408, 3412, 508, 517, 527, 933C, 939C, 943, 953, 963, 963B, 973, D3C II, D3C III, D4C III, D4E, D4E SR, D4H, D4H XL, D4HTSK II, D4HTSK III, D5B, D5C III, D5E, D5H, D5H XL, D5HTSK II, D6D, D6E SR, D7G,...
120G, 130G, 140G, 191, 528, 561D, 571G, 594H, 611, 615C, 815, 824B, 825B, 834, 920, 930, 931B, 941, 943, 950, 951B, 953, 953B, 953C, 955C, 955H, 955K, 955L, 963, 966C, 966R, 973, 977D, 977H, 977K, 977...
7A, 7S, 824S, 834B, 8A, 8U, D7G
7A, 7S, 824S, 834B, 8A, 8S, 8U, D7G
6B7245
END
977D
977D
6B8482
END
955C, D7G
955C, D7G
824C, 824G, 824G II, 824H, 834B, 836H, D7G, D7G2
824C, 824G, 824G II, 824H, 834B, 836H, D7G, D7G2
5J9628
END BIT (L.H. .875" Thick)
7A, 7S, 814S, 824C, 824S, D7G
7A, 7S, 814S, 824C, 824S, D7G
9P9374
END ASSEM.
D7G, D8K
D7G, D8K
1K6555
END-ADJUSTMENT YOKE
561B, D6C, D6D, D6E SR
561B, D6C, D6D, D6E SR
D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6D SR, D6E SR, D6F SR, D6G SR, D7G, D8H
6T8000
END AS-ROD
D6F SR, D6G SR, D6H, D7H
D6F SR, D6G SR, D6H, D7H
0375034
END-ADJUSTMENT ROD
D6H, D7H
D6H, D7H
815, 816, 834B, 836, 950, 966C, 977L, 980, 980B, 983B, D6H, D6H XL, D6H XR, D7H, D8N, D8R
973, D3B, D4H, D4H XL, D5H, D5H XL
9T7646
END-DETENT
CP-433E, CP-44, CP-56, CP-573E, CP-64, CS-433E, CS-44, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-68B, CS-74, CS-74B, D3C III, D4C, D4C III, D5C III
CP-433E, CP-44, CP-56, CP-573E, CP-64, CS-433E, CS-44, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-68B, CS-74, CS-74B, D3C III, D4C, D4C III, D5C III
515, 525, 525B, 528B, 530B, 535B, 545, 814B, 815B, 816B, 824C, 825C, 826C, CB-334D, CB-334E, CB-335D, CP-433E, CP-44, CS-423E, CS-433E, CS-44, D3C III, D4C III, D5C III, R1300, R1300G
8T7054
END AS-ROD
D6H, D6H XL, D6H XR, D7H, D8N
D6H, D6H XL, D6H XR, D7H, D8N
3W3546
END-YOKE ROD
D4H, D5H
D4H, D5H
6B1054
END-PIPE BRACE
D4E SR, D5B, D5E, D6F SR, D6G SR
D4E SR, D5B, D5E, D6F SR, D6G SR
4K5563
END-YOKE ADJUSTMENT ROD
120, 140, 561D, 941, 953, D4D, D4E, D4E SR, D5B, D5E, D6D, D6E, D6E SR
120, 140, 561D, 941, 953, D4D, D4E, D4E SR, D5B, D5E, D6D, D6E, D6E SR