8J9029 END BIT Caterpillar parts
8A
Rating:
Alternative (cross code) number:
CA8J9029
8J-9029
8J9029
CA8J9029
8J-9029
8J9029
Weight: 96 pounds 43 kg.
BULLDOZER,
Compatible equipment models: 8J9029:
Number on catalog scheme:
15
For full view, you need register
Information:
Illustration 1 g06071196
Table 1
Specifications for 363-7645 Cylinder Block
Item Qty Part Specification Description
1 - - Cylinder bore is 105.0125 0.0125 mm (4.13434 0.00049 inch).
2 - - Diameter of the bushing in the cylinder block for the number 1 camshaft bearing is 55.578 0.015 mm (2.1881 0.0006 inch).
Diameter of the bushing in the cylinder block for the number 2 camshaft bearing is 50.5715 0.0255 mm (1.99100 0.00100 inch).
Diameter of the bushing in the cylinder block for the number 3 camshaft bearing is 50.3175 0.0255 mm (1.98100 0.00100 inch).
Diameter of the bushing in the cylinder block for the number 4 camshaft bearing is 50.0635 0.0255 mm (1.97100 0.00100 inch).
3 - - Bore in the cylinder block for the main bearings is 88.259 0.013 mm (3.4748 0.0005 inch).
4 1 232-1322 Plug Torque to 35 5 N m (26 4 lb ft).
Caterpillar parts catalog:
Parts end Caterpillar catalog:
7A, 7S, 824S, 834B, 8A, 8U, D7G
7A, 7S, 824S, 834B, 8A, 8S, 8U, D7G
8A, 8S
8A, 8S
2J2571
END BIT (R.H.)
7A, 824S, 8A
7A, 824S, 8A
2J2572
END BIT (L.H.)
7A, 824S, 8A
7A, 824S, 8A
8A, D8L
9J1539
END BIT (R.H.) (Penetration)
8A, 8S, D8L
8A, 8S, D8L
9J1540
END BIT (L.H.) (Penetration)
8A, 8S, D8L
8A, 8S, D8L
1J0127
END BIT (R.H.)
4S, 955C, 955H
4S, 955C, 955H
1J0128
END BIT (L.H.)
4S, 955C, 955H
4S, 955C, 955H
2K2294
END
572G, 583K
572G, 583K
5J6938
END BIT (LH)
5S, 6A, 814S
5S, 6A, 814S
5J6937
END BIT (RH)
5S, 6A, 814S
5S, 6A, 814S
4F6890
END BIT (L.H.)
7A, 8 SR, 8A
7A, 8 SR, 8A
4F6889
END BIT (R.H.)
7A, 8 SR, 8A
7A, 8 SR, 8A