1023830 ENGINE AR Caterpillar parts
315
Rating:
Alternative (cross code) number:
CA1023830
102-3830
1023830
CA1023830
102-3830
1023830
EXCAVATOR,
Compatible equipment models: 1023830:
Information:
Removal Procedure
Start By:
Remove the turbochargers, if necessary. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01619025
Remove clamps (1), bolts (3), and exhaust elbows (2).
Remove exhaust couplings (5) from exhaust elbow (4). Remove the sealing rings from exhaust couplings (5).
Remove bolts (9) and exhaust elbow (4).
Remove bolts (8) and support (7).
If necessary, remove pipe plugs (6) from exhaust elbow (4). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01619025
If necessary, apply Tooling (A) to pipe plugs (6) and install pipe plugs (6) in exhaust elbow (4).
Install support (7) and bolts (8).
Install exhaust elbow (4) and bolts (9).
Install the sealing rings on exhaust couplings (5). Install exhaust couplings (5) in exhaust elbow (4).
Install exhaust elbows (2), bolts (3), and clamps (1). Tighten clamps (1) to a torque of 9.5 1.0 N m (85 9 lb in). Lightly tap clamps (1) around the circumference. Tighten clamps (1) again to a torque of 9.5 1.0 N m (85 9 lb in). End By:
Install the turbochargers, if necessary. Refer to Disassembly and Assembly, "Turbocharger - Install".
Start By:
Remove the turbochargers, if necessary. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01619025
Remove clamps (1), bolts (3), and exhaust elbows (2).
Remove exhaust couplings (5) from exhaust elbow (4). Remove the sealing rings from exhaust couplings (5).
Remove bolts (9) and exhaust elbow (4).
Remove bolts (8) and support (7).
If necessary, remove pipe plugs (6) from exhaust elbow (4). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01619025
If necessary, apply Tooling (A) to pipe plugs (6) and install pipe plugs (6) in exhaust elbow (4).
Install support (7) and bolts (8).
Install exhaust elbow (4) and bolts (9).
Install the sealing rings on exhaust couplings (5). Install exhaust couplings (5) in exhaust elbow (4).
Install exhaust elbows (2), bolts (3), and clamps (1). Tighten clamps (1) to a torque of 9.5 1.0 N m (85 9 lb in). Lightly tap clamps (1) around the circumference. Tighten clamps (1) again to a torque of 9.5 1.0 N m (85 9 lb in). End By:
Install the turbochargers, if necessary. Refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar SIS machinery equipment:
Parts engine Caterpillar catalog:
9Y6255
ENGINE AR
3406B
3406B
1029406
ENGINE AR
G3412
G3412
7E2220
ENGINE AR
3406B
3406B