ENGINE AR-BASIC 10R2479 - Caterpillar

7S (60K) and 7U (61K) Bulldozers
(1) Distance between the center of each trunnion bearing ... 116.24 in.(2952.5 mm)(2) The distance the screw is out of each brace must be the same after the adjustment for distance (1) and distance (3) is correct.(3) Distance between back of the bulldozer blade and each strut assembly ... 1.00 in.(25.4 mm) Torque for bolts that fasten the brace and tilt cylinder to top of blade (four each side) ... 280 20 lb. ft.(380 30 N m)8S (29V) and 8U (30V) Bulldozers
(1) Distance between the center of each trunnion bearing ... 116.24 in.(2952.5 mm)(2) The distance the screw is out of each brace must be the same after the adjustment for distance (1) and distance (3) is correct.(3) Distance between back of the bulldozer blade and each strut assembly ... 1.50 in.(38.1 mm) Torque for bolts that fasten the brace and tilt cylinder to top of blade (four each side) ... 280 20 lb. ft.(380 30 N m)9S (18K) and 9U (19K) Bulldozers
(1) Distance between the center of each trunnion bearing ... 126.88 in.(3222.8 mm)(2) The distance the screw is out of each brace must be the same after the adjustment for distance (1) and distance (3) is correct.(3) Distance between back of the bulldozer blade and each strut assembly ... 1.50 in.(38.1 mm) Tilt bulldozers 9S, 18K and 9U, 19K have the hydraulic cylinder on either the (R.H.) or the (L.H.) push arm.