ENGINE AR-PRIM 10R6006 - Caterpillar

1. Use the backhoe control valve to put the stick (3) in the extended position and carefully lower the stick (3) on to tooling (A).2. Lower the bucket (1) until the tips make contact with the ground.3. Remove pin (2) and spacer.4. Fasten a nylon strap and tooling (B) to the bucket (4).5. Remove pin (5) and remove bucket (1). The weight of the bucket is 124 kg (275 lb.).6. Inspect bearings (4) for wear or damage and remove if necessary.Install Bucket (Backhoe)
1. Install bearings (1) in the bucket.2. Fasten a nylon strap and tooling (B) to the bucket.3. Install pin (2). Install the washers and cotter pins.4. Install pin (4) and spacer (3). Install the washers and cotter pins.5. Remove the nylon strap.6. Start the machine and carefully use the backhoe control valve to lift the stick.7. Remove tooling (A).8. Carefully lower the bucket to the ground.