ENGINE AR-BASIC 10R7244 - Caterpillar

Pre-Start Checks
1. Maintain the engine oil level between the ADD and the FULL mark on the ENGINE STOPPED side of the dipstick. 2. Open the floor plate access cover. 3. Maintain the power train system oil level between the ADD and the FULL mark on the dipstick. Close the cover. 4. Maintain the hydraulic implement oil level between the ADD and the FULL mark in the sight gauge. 5. Remove the coolant fill cap.6. Maintain the engine coolant above the low level plate. 7. Check the fuel level. The tank should be full at the start of the shift. 8. Drain moisture and sediment, as required, from the fuel tank. 9. Service the air filter elements when the yellow piston enters the red area in the indicator. 10. Adjust the seat to allow full brake pedal travel with the operator's back against seat back.11. Adjust the mirror (if equipped) to allow proper viewing from the seat to see close behind the machine.12. Adjust the seat belt to fit snug.