ENGINE AR-COMPL 10R8915 - Caterpillar

You must read and understand the warnings and instructions contained in the Safety section of this manual before performing any operation or maintenance procedures.Power Train Oil System
Change Filter
1. Remove the floor plate. 2. Remove the filter element cover assembly.3. Remove and discard the filter element.4. Drain all the oil from the filter housing.5. Clean the cover assembly.6. Inspect the cover seal. Replace if damaged.7. Install the new element and cover.8. Start the engine. 9. Maintain the oil level to the FULL mark on dipstick (1). Add the oil through fill tube (2) if necessary.10. Stop the engine and install the floor plate.