ENGINE AR 1215777 - Caterpillar

Illustration 1 g06292388
Table 1
Item Qty Part Specification Description
1 2 128-7905 Spacer As required, use the spacers in order to provide a maximum clearance of 1.0 mm (0.04 inch). Position the spacers in order to equalize the clearance within 3 mm (0.1 inch) between the wear bars on the lift arms and the wear bars on the radiator guard for each side of the machine.
Thickness of one spacer is 1.0 mm (0.04 inch).
2 1 128-5010 Pin Diameter is 60.000 to 60.050 mm (2.3622 to 2.3642 inch).
Bore for the pin in the sleeve bearing after installation is 60.237 0.046 mm (2.3715 0.0018 inch).
Bore for the sleeve bearing in the lift arm boss is 67.0 0.5 mm (2.64 0.02 inch).
3 2 128-7903 Spacer As required, use the spacers in order to provide a maximum total clearance of 1.0 mm (0.04 inch). Position the spacers in order to equalize the clearance within 3 mm (0.1 inch) between the wear bars on the lift arms and the wear bars on the radiator guard for each side of the machine.
Thickness of one spacer is 3 mm (0.1 inch).
4 2 9R-8390 Spacer As required, use the spacers in order to provide a maximum total clearance of 1.0 mm (0.04 inch).
Thickness of one spacer is 1.0 mm (0.04 inch).
5 1 9R-9373 Pin As Diameter is 39.95 to 40.00 mm (1.573 to 1.575 inch).
Bore diameter for the pin assembly is 40.225 0.025 mm (1.5837 0.0010 inch).
6 2 9R-4066 Washer As required, use the washers in order to provide a maximum total clearance of 1.0 mm (0.04 inch).
Thickness of one washer is 4 mm (0.2 inch).
7 10 9R-0109 Washer As required, use the washers in order to provide a clearance of 1.0 1.0 mm (0.04 0.04 inch) in the inside of the lift arms. Equalize washers in order to center the bucket on the lift arms.
Thickness of one washer is 3 mm (0.1 inch).
8 4 119-4594 Washer As required, use the washers in order to provide a clearance of 1.0 1.0 mm (0.04 0.04 inch) in the inside of the lift arms. Equalize washers in order to center the bucket on the lift arms.
Thickness of one washer is 1.0 mm (0.04 inch).
9 1 132-6496 Pin As Diameter is 39.95 to 40.00 mm (1.573 to 1.575 inch).
Bore diameter for the pin assembly is 40.225 0.025 mm (1.5837 0.0010 inch).
10 2 130-5451 Pin Diameter is 44.95 to 45.00 mm (1.770 to 1.772 inch).
11 6 111-4337 Washer As required, use the washers in order to provide a maximum total clearance of 1.0 mm (0.04 inch).
Thickness of one washer is 1.0 mm (0.04 inch).
12 2 9R-3182 Pin Diameter is 39.95 to 40.00 mm (1.573 to 1.575 inch).
Bore for the pin in the sleeve bearing after installation is 40.233 0.046 mm (1.5840 0.0018 inch).
Bore for the sleeve bearing in the lift arm boss