ENGINE AR 1332151 - Caterpillar

CB-534D
This schematic is a simplified schematic of the vibratory system. The schematic is electrically correct, but the schematic does not show possible harness connections. Always refer to the Electrical System Schematic in the Service Manual of the machine for a detailed schematic.
Illustration 1 g01581113
Electrical schematic for the vibratory system (1) "B+" from main power relay (2) Drum selector switch (3) Selector solenoid (front drum motor) (4) Vibratory fuse (5) Vibratory tachometer (6) Selector solenoid (rear motor) (7) Gauge fuse (8) Speed sensor (front motor) (9) Fuse (machine ECM) (10) Amplitude selector switch (optional) (11) Speed sensor (rear motor) (12) Switch (vibratory mode control) (13) Vibratory control solenoids (14) Machine ECM (15) CAN resistor (16) CAN port (17) Vibratory indicator (18) Line to fuse for backup alarm (19) Propel sensor (20) Propel leverNote: For two amplitude or versa vibe machines, connect "C18" to "C20" and connect "C19" to "C21".Note: For five amplitude machines, connect "C18" to "C21" and connect "C19" to "C20". CB-564D
Illustration 2 g01581213
Electrical schematic for the vibratory system (1) "B+" from main power relay (2) Drum selector switch (3) Selector solenoid (front drum motor) (4) Vibratory fuse (5) Vibratory tachometer (6) Selector solenoid (rear motor) (7) Gauge fuse (8) Speed sensor (front motor) (9) Fuse (machine ECM) (10) Amplitude selector switch (optional) (11) Speed sensor (rear motor) (12) Switch (vibratory mode control) (13) Vibratory control solenoids (14) Machine ECM (15) CAN resistor (16) CAN port (17) Vibratory indicator (18) Model configuration (19) Propel sensor (20) Propel leverNote: For two amplitude or versa vibe machines, connect "J-C4" to "J-C101".Note: For five amplitude machines, connect "J-C4" to "J-C100".