AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 1399795 - Caterpillar



1399795 ENGINE AR-COMPLETE Caterpillar parts C-12 ENGINE
Rating:
17
Alternative (cross code) number:
CA1399795
139-9795
1399795
Caterpillar 1399795 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1399795 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 1399795:

TRUCK ENGINE  C-12   Caterpillar
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     195-4609     Seal Pick     1    
B     -     Isopropyl Alcohol     -    
Illustration 1 g03816312
Remove bolts (1) and screen (2). Open door assembly (3) .
Illustration 2 g03816313
Remove bolts (4) and reposition cover assembly (5) .
Illustration 3 g03816318
Note: The actual heated nozzle is part of the combustion head and is not serviceable, therefore the heated nozzle is not shown.
Remove allen bolt (6) and the clamp assembly. Remove harness assembly (7) that connects to the heated nozzle (heated nozzle not shown).
Illustration 4 g03816317
For reference only.Note: Mark the routing of harness assembly (7) for assembly purposes.
Disconnect harness assembly (7). Cut all cable straps (8) and remove harness assembly (7)
Illustration 5 g03816320
Use Tooling (A) in order to remove O-ring seals (9) and (10) from harness assembly (7). Discard O-ring seals (9) and (10) .Installation Procedure
Install harness assembly (7) in the reverse order of removal.
Use caution when you are using isopropyl alcohol. Avoid prolonged skin contact with isopropyl alcohol.Vapors may be harmful if inhaled. Use only in a well ventilated area. Do not smoke while using isopropyl alcohol.Isopropyl alcohol is flammable. Do not use near an open flame or near welding operations. Keep isopropyl alcohol away from heated surfaces exceeding 482°C (900°F).
Note: This connection is an electrical connection and cannot be lubricated with a petroleum-based lubricant. Isopropyl alcohol is the only approved lubrication for this connection.
Lubricate new O-ring seals (9) and (10) with Tooling (B) prior to installation.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.