AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 1399819 - Caterpillar



1399819 ENGINE AR-COMPLETE Caterpillar parts C-10 ENGINE
Rating:
51
Alternative (cross code) number:
CA1399819
139-9819
1399819
Caterpillar 1399819 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1399819 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 1399819:

TRUCK ENGINE  C-10   Caterpillar
  For full view, you need register

Information:

Service: Calibrations
Service > Calibrations
Illustration 1 g03883510
To view the Calibrations menus, press the Service button (1).
(1) Service button
Illustration 2 g06001170
(2) Calibrations buttonSome Calibrations will not appear in Paver menus. Show or Hide conditions depend on whether the Paver is a wheeled or tracked machine.Four Displays are installed in one Paver machine. Two Displays are on the left side of the machine and two Displays are on the right side. Left-side Displays will have Calibrations specific to the left side of the Paver. Right-side Displays will have Calibrations specific to the right side of the machine.Currently, the following Calibrations are configured for the Paver:Service > Calibrations > Drive Pump Solenoid
Forward Control Solenoid
Reverse Control SolenoidService > Calibrations > Feeder Solenoid
Left Conveyor
Right Conveyor
Left Auger
Right AugerService > Calibrations > Material Paddle Sensor
Left Conveyor Sensor
Right Conveyor Sensor
Screed Left Sensor
Screed Right SensorService > Calibrations > Steering Wheel
Left StationLeft Station (If Tracked machine)Machine Model is TJ5, or RLM, or MH6, or 655, or AP5, or 5F5, or ML6, or P65, or 453, or 452, or 480, or 479.
Right Station(If Tracked machine)Machine Model is TJ5, or RLM, or MH6, or 655, or AP5, or 5F5, or ML6, or P65, or NRG, or NTT, or 453, or 452, or 480, or 479.
Front Steering SensorIf Wheel machineMachine Model is AC4, or AP6, or LR6, or 449, or 503, or WHY, or YES.Service > Calibrations > Hopper Material Height
If Hopper Monitoring System Installation is installedService > Calibrations > Tamper Bar SolenoidService > Calibrations > Tamper Bar Solenoid2Service > Calibrations > Vibratory System SolenoidService > Calibrations > Tow Point Solenoid
Machine Model is WHY, or YES, or NRG, or NTT
Left Tow Point Solenoids
Right Tow Point SolenoidsService > Calibrations > Tow Point Position Sensor
The Paver Position sensor must be installed.Service > Calibrations > Auger Height Position Sensor
The Paver Position sensor must be installed.Service > Calibrations > Lift Cylinder Position Sensor
The Paver Position sensor must be installed.An example of the Drive Pump Solenoid Calibration appears below.Calibration Example: Drive Pump Solenoid
Press the "Service" button (1) on the right side of the Display. The Service menu page will appear.
Press the "Calibrations" button (2). The "Calibrations" button will highlight in yellow and the Calibrations menu page will appear.
Illustration 3 g06001174
(3) Drive Pump Solenoid button
Press the "Drive Pump Solenoid" button (3). The "Drive Pump Solenoid" button will highlight in yellow and the Drive Pump Solenoid Calibration menu page will appear.
Illustration 4 g06001183
(4) Forward Control Solenoid button
Press the "Forward Control Solenoid" button (4). The "Forward Control Solenoid" button will highlight in yellow and the Forward Control Solenoid Calibration instructions will appear.
Illustration 5 g06001189
(5) DOWN button
(6) BACK button
Press the DOWN arrow button (5) to scroll through the Calibration Instruction pages. Press the BACK button (6) to return to the previous pages.
Illustration 6 g06001194
(7) ABORT button
(8) NEXT button
(9) OK button
Press the DOWN arrow button (5) to read the Calibration steps.
Press the ABORT button (7) to discontinue the Calibration.Note: If the Abort button is pressed, a "Calibration Unsuccessful" screen will appear.
Press the Next button (8) to Start the Calibration.
Press the "OK" button (9) to exit the Calibration procedure.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.