AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 1399912 - Caterpillar



1399912 ENGINE AR-COMPLETE Caterpillar parts C-12 ENGINE
Rating:
48
Alternative (cross code) number:
CA1399912
139-9912
1399912
Caterpillar 1399912 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1399912 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 1399912:

TRUCK ENGINE  C-12   Caterpillar
  For full view, you need register

Information:


Table 3
Required Tools
Tool Item Qty Part No Description
A A1 2 8C-6874 Connectors
A2 2 6V-9746 O-Ring Seals
B 1 8T-0454 Flow Meter Gp
(20 - 200 l/min (5 - 50 gal/min))
C C1 2 6V-8942 O-Ring Reducer
C2 2 6V-8398 O-Ring Seals
C3 2 6V-8556 Nuts
D 2 124-2117 Couplings
E 1 122-6890 Hydraulic Hose
(2 M (6.6 ft))
F - 5P-3413 Pipe Sealant
Apply Tool (F) to the pipe thread on each Tool (A).
Install one Tool (A) in each end of Tool (B).
Install one Tool (C) on each Tool (A).
Install one Tool (D) in each end of Tool (E). Connect this hose assembly to inlet side of Tool (B). Test Preparation
Drive the machine to a smooth, horizontal surface on loose uncompacted soil. Note: If loose, uncompacted soil is not available, isolate the drum from the ground during this test.
Illustration 2 g03817180
Move propel lever (1) to the NEUTRAL position.
Move parking brake switch (2) to the ON position.
Move throttle switch (3) into the LOW-IDLE position.
If necessary, move ECO mode switch (4) into the OFF position.
Illustration 3 g03817182
If the machine is equipped with a leveling blade, use blade control pedal (5) to lower the blade to the ground.
Illustration 4 g03817185
After the engine has operated at low idle for 5 minutes, move engine start switch (6) to the OFF position.
Illustration 5 g03817217
Disconnect case drain hose assembly (7) from vibratory motor fitting (8).
Connect case drain hose assembly (7) to outlet port of Tool (B). Connect inlet hose from Tool (B) to vibratory motor fitting (8). Test Procedure
Move engine start switch (6) into the START position. Release the switch when the engine starts.
Operate the engine at low idle for a few minutes. Use throttle switch (3) to operate the engine at high idle.
Illustration 6 g03817221
Monitor the hydraulic oil temperature on display (9). Operate the machine until the oil temperature reaches a minimum of 38 °C (100 °F).
Illustration 7 g03817223
If necessary, move amplitude selector switch (10) to the LOW-AMPLITUDE position.
If necessary, move vibratory mode switch (11) to the MANUAL position.
Illustration 8 g03817226
Actuate vibratory switch (12) on top of the propel lever in order to start the vibratory system.
Read flow on Tool (B). The flow should be between TBD 5.5 L/min (1.5 US gpm) and 8.5 L/min (2.2 US gpm).
Actuate vibratory switch (12) on top of propel lever in order to stop the vibratory system.
Move amplitude selector switch (10) to the HIGH-AMPLITUDE position. Note: When the vibratory system is in high amplitude, "Vibe Amplitude Mode High" will appear on the display.
Actuate vibratory switch (12) on top of propel lever in order to start the vibratory system.
Read flow on Tool (B). The flow should be 7.5 2 L/min (2 0.5 US gpm).
Actuate vibratory switch (12) on top of propel lever in order to stop the vibratory system.
Move throttle switch (3) into the LOW-IDLE position.
Move engine start switch (6) to the OFF position.
Remove Tool (B) from vibratory motor, and connect case drain line (7) to vibratory motor fitting (8). Note: If

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.