AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 1399914 - Caterpillar



1399914 ENGINE AR-COMPLETE Caterpillar parts C-10 ENGINE
Rating:
66
Alternative (cross code) number:
CA1399914
139-9914
1399914
Caterpillar 1399914 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1399914 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Related part:
1399914  SHORT BLOCK  20R0241  R

Compatible equipment models: 1399914:

TRUCK ENGINE  C-10   Caterpillar
  For full view, you need register

Information:


Illustration 1 g01857156
Gear train
(1) Camshaft gear Torque for the 8.8 graded bolt for the camshaft gear ... 95 N m (70 lb ft)Torque for the 10.9 graded bolt for the camshaft gear ... 120 N m (89 lb ft)Number of teeth ... 72 (2) Idler gear and hub Torque for the bolts for the idler gear ... 44 N m (33 lb ft)Width of medium duty and heavy duty idler gear bearing ... 25.45 to 25.55 mm (1.00197 to 1.00590 inch)Inside diameter of medium duty and heavy duty idler gear bearings ... 56.00 to 56.03 mm (2.20472 to 2.20590 inch)Outside diameter of medium duty and heavy duty idler gear hub ... 55.95 to 55.97 mm (2.20275 to 2.20354 inch)Clearance of medium duty and heavy duty idler gear bearing on hub ... 0.03 to 0.08 mm (0.00118 to 0.00315 inch)The end play of the medium duty and heavy duty idler gear ... 0.05 to 0.15 mm (0.00197 to 0.00591 inch)Number of teeth ... 97 (3) Fuel injection pump drive gear Torque for the nut ... 64 N m (47 lb ft)Number of teeth ... 36 (4) Oil pump gear The number of teeth on the oil pump gear ... 18Backlash values Backlash between the oil pump idler gear (5) and the oil pump drive gear (4) ... 0.05 to 0.15 mm (0.0020 to 0.0059 inch)Backlash between the oil pump idler gear (5) and the crankshaft gear (6) ... 0.025 to 0.210 mm (0.00098 to 0.00827 inch)Backlash between the idler gear (2) and the crankshaft gear (6) ... 0.05 to 0.15 mm (0.0020 to 0.0059 inch)Backlash between the camshaft gear (1) and the idler gear (2) ... 0.05 to 0.15 mm (0.0020 to 0.0059 inch)Backlash between the fuel injection pump gear (3) and the idler gear (2) ... 0.05 to 0.15 mm (0.0020 to 0.0059 inch)Backlash between the water pump gear (not shown) and the fuel injection pump gear (3) ... 0.05 to 0.15 mm (0.0020 to 0.0059 inch)Backlash between the power take-off drive (if equipped) and the idler gear (2) ... 0.05 to 0.250 mm (0.0020 to 0.0098 inch) (5) Oil pump idler gear Inside diameter of oil pump idler gear bearing ... 16.012 to 16.038 mm (0.6304 to 0.6314 inch)Outside diameter of oil pump idler gear shaft ... 15.966 to 15.984 mm (0.6286 to 0.6293 inch)Clearance of oil pump idler gear bearing on shaft ... 0.028 to 0.072 mm (0.0011 to 0.0028 inch)End play of the oil pump idler gear ... 0.050 to 0.275 mm (0.0019 to 0.0108 inch)End play of the oil pump drive gear ... 0.005 to 0.090 mm (0.00020 to 0.00354 inch) (6) Crankshaft gear Bore diameter of crankshaft gear ... 51.00 to 51.03 mm (2.0079 to 2.0091 inch)Outside diameter of crankshaft hub ... 51.021 to 51.002 mm (2.0087 to 2.0079 inch)Clearance of gear on crankshaft ... −0.021 to +0.028 mm (−0.00083 to 0.00110 inch)Number of teeth ... 36

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.