AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 1468586 - Caterpillar



1468586 ENGINE AR-COMPLETE Caterpillar parts C-10 ENGINE
Rating:
86
Alternative (cross code) number:
CA1468586
146-8586
1468586
Caterpillar 1468586 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1468586 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 1468586:

TRUCK ENGINE  C-10   Caterpillar
  For full view, you need register

Information:


Illustration 1 g03736242
Typical example
Lubricate the threads and the underside of the head bolts with clean engine oil. Tighten the M15 bolts in the sequence that is shown in illustration 1 to the following torque. ... 130 N m (96 lb ft)Tighten the M12 bolts in the sequence that is shown in illustration 1 to the following torque. ... 65 N m (48 lb ft)Tighten the M15 bolts in the sequence that is shown in illustration 1 to the additional amount. ... 90 degreesTighten the M12 bolts in the sequence that is shown in illustration 1 to the additional amount. ... 90 degreesTighten the M15 bolts in the sequence that is shown in illustration 1 to the additional amount. ... 70 degreesTighten the M12 bolts in the sequence that is shown in illustration 1 to the additional amount. ... 60 degreesMinimum thickness of cylinder head ... 90 mm (3.54330 inch)
Illustration 2 g03698264
Flatness of the cylinder head (typical example)
Note: The maximum distortion of the bottom face of the cylinder head is given in table 1.
Table 1
Dimension Maximum Permissible Distortion
Width (A) 0.05 mm (0.00197 inch)
Length (B) 0.04 mm (0.00157 inch)
Diagonal Line (C) 0.04 mm (0.00157 inch)
Illustration 3 g02328933
Typical example
(D) Valve guide height from the top of the valve guide to the valve spring seat ... 7.85 to 8.95 mm (0.30905 to 0.35236 inch) (E) Outside diameter of the valve guides ... 10.028 to 10.039 mm (0.39480 to 0.39524 inch) (F) Length of the valve guides ... 48.8 to 49.2 mm (1.92126 to 1.93700 inch) (G) Internal diameter of the valve guides ... 5.2 to 5.4 mm (0.20472 to 0.21260 inch) (H) Valve depths Inlet ... 0.3 to 0.7 mm (0.01181 to 0.02756 inch)The service limit for the depth of the inlet valve ... 0.9 mm (0.03543 inch)Exhaust ... 0.3 to 0.7 mm (0.01181 to 0.02756 inch)The service limit for the exhaust valve depth ... 1 mm (0.03937 inch)
Illustration 4 g02474819
Typical example
(J) Diameter of the parent bore in the cylinder head ... 9.974 to 10.011 mm (0.39268 to 0.39413 inch) (K) Seat angle Inlet ... 59.5 degreesExhaust ... 59.5 degrees
Illustration 5 g02847819
Typical example
(L) Seat surface finish ... Ra 1.6 microns (M) Concentricity of valve seat to valve guide parent bore Maximum Total Indicated Reading (TIR) ... 0.05 mm (0.00197 inch)

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.