1669471 ENGINE AR-COMPLETE Caterpillar parts
3126B
Rating:
Alternative (cross code) number:
CA1669471
166-9471
1669471
CA1669471
166-9471
1669471
TRUCK ENGINE,
Related part:
1669471
LONG BLOCK M
0R7907
R
1669471
SHORT BLOCK
0R9964
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$24.57
06 Jul 2022
US: Arrrma
New Replacement Belt Fits Allis Chalmers 1669471
Replacement Parts New Replacement Belt Fits Allis Chalmers 1669471 || HIGH-GRADE ENGINEERED RUBBER: Thanks to fiber-rich compounding and outstanding consistency, each rubber belt and will outlast and outperform ordinary rubber drive belts. || SUPREME DURABILITY, WEAR RESISTANCE: In addition to a tight fit and flawless operation, our belts have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments || SERVICE LIFE. All of our belts are designed for a long service life. WIDE COMPATIBILITY - drive belts are compatible with most brands. Order our high-strength rubber belt and profit from reduced downtime and maintenance. || PACKAGING AND DELIVERY: We package with great care. We know how frustrating it is to receive an item only to find that it has been damaged during transportation. We assume that the postal system will abuse the package so we pad and package accordingly. We offer free shipping within the continental US, via the USPS in most cases. Please allow 24 hours for handling. Multiple orders going to the same location will be combined whenever possible.
Replacement Parts New Replacement Belt Fits Allis Chalmers 1669471 || HIGH-GRADE ENGINEERED RUBBER: Thanks to fiber-rich compounding and outstanding consistency, each rubber belt and will outlast and outperform ordinary rubber drive belts. || SUPREME DURABILITY, WEAR RESISTANCE: In addition to a tight fit and flawless operation, our belts have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments || SERVICE LIFE. All of our belts are designed for a long service life. WIDE COMPATIBILITY - drive belts are compatible with most brands. Order our high-strength rubber belt and profit from reduced downtime and maintenance. || PACKAGING AND DELIVERY: We package with great care. We know how frustrating it is to receive an item only to find that it has been damaged during transportation. We assume that the postal system will abuse the package so we pad and package accordingly. We offer free shipping within the continental US, via the USPS in most cases. Please allow 24 hours for handling. Multiple orders going to the same location will be combined whenever possible.
$20.98
06 Jul 2022
US: Novnus
Replacement Parts Belt for Allis Chalmers 1669471
Replacement Parts Belt For ALLIS CHALMERS 1669471 , A103 V Belt - A Series Belt - Dimensions (Width X Outside Circumference): 1/2in X 105in. || V belts are a classic style suitable for higher speed Fractional Horsepower drives on industrial and agricultural machinery. Designed for many HVAC applications, low vibration, less noise, more efficiency helps for longer motor and v belt life. || Series: A (Width: 1/2", Depth: 5/16"). Type Of Cord: HIGH-GRADE ENGINEERED RUBBER. All of our belts are designed for a long SERVICE LIFE. || These are high quality replacement belts, they are not OEM belts. The Belt you will receive will be marked as "A -series" or "4L -series" (part number). Our belts will not have the OEM part number printed on them. || Classic belts have a special outer wrap for better flexibility & traction. Additionally these belts are anti-static, heat & oil resistant.
Replacement Parts Belt For ALLIS CHALMERS 1669471 , A103 V Belt - A Series Belt - Dimensions (Width X Outside Circumference): 1/2in X 105in. || V belts are a classic style suitable for higher speed Fractional Horsepower drives on industrial and agricultural machinery. Designed for many HVAC applications, low vibration, less noise, more efficiency helps for longer motor and v belt life. || Series: A (Width: 1/2", Depth: 5/16"). Type Of Cord: HIGH-GRADE ENGINEERED RUBBER. All of our belts are designed for a long SERVICE LIFE. || These are high quality replacement belts, they are not OEM belts. The Belt you will receive will be marked as "A -series" or "4L -series" (part number). Our belts will not have the OEM part number printed on them. || Classic belts have a special outer wrap for better flexibility & traction. Additionally these belts are anti-static, heat & oil resistant.
$19.98
06 Jul 2022
US: Novnus
Replacement Parts Belt for Allis Chalmers 1669471
Replacement Parts Belt For ALLIS CHALMERS 1669471 , A105 V Belt - A Series Belt - Dimensions (Width X Outside Circumference): 1/2in X 107in. || V belts are a classic style suitable for higher speed Fractional Horsepower drives on industrial and agricultural machinery. Designed for many HVAC applications, low vibration, less noise, more efficiency helps for longer motor and v belt life. || Series: A (Width: 1/2", Depth: 5/16"). Type Of Cord: HIGH-GRADE ENGINEERED RUBBER. All of our belts are designed for a long SERVICE LIFE. || These are high quality replacement belts, they are not OEM belts. The Belt you will receive will be marked as "A -series" or "4L -series" (part number). Our belts will not have the OEM part number printed on them. || Classic belts have a special outer wrap for better flexibility & traction. Additionally these belts are anti-static, heat & oil resistant.
Replacement Parts Belt For ALLIS CHALMERS 1669471 , A105 V Belt - A Series Belt - Dimensions (Width X Outside Circumference): 1/2in X 107in. || V belts are a classic style suitable for higher speed Fractional Horsepower drives on industrial and agricultural machinery. Designed for many HVAC applications, low vibration, less noise, more efficiency helps for longer motor and v belt life. || Series: A (Width: 1/2", Depth: 5/16"). Type Of Cord: HIGH-GRADE ENGINEERED RUBBER. All of our belts are designed for a long SERVICE LIFE. || These are high quality replacement belts, they are not OEM belts. The Belt you will receive will be marked as "A -series" or "4L -series" (part number). Our belts will not have the OEM part number printed on them. || Classic belts have a special outer wrap for better flexibility & traction. Additionally these belts are anti-static, heat & oil resistant.
For full view, you need register
Compatible equipment models: 1669471:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacture (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacture (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Caterpillar SIS machinery equipment:
Parts engine Caterpillar catalog:
120H, 135H, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 325C FM, 561N, 570B, 580B, 938G II, 950G II, 953C, 962G II, 963C, C7, D5N, D6N, IT38G II, IT62G II, M325C MH, SPP101