ENGINE AR-COMPLETE 1899542 - Caterpillar

Do not continuously operate the refueling pump for more than 30 minutes. Do not operate the refueling pump more than a few seconds without fuel. Pump damage can result.
Use the following procedure to pump fuel and store the hose:
Open the cover of the storage box that is located on the right side in front of the fuel tank. The electric refueling pump pumps fuel into the fuel tank.
Illustration 1 g03795558
(1) Cap
(2) Suction Hose
Remove cap (1) from the fuel tank, in order to allow proper ventilation.
Insert the free end of the suction hose into a container of fuel.
Push the on switch in order to supply the fuel to the tank. When the tank is full, the pump stops refueling. Note: Check the fuel gauge in order to determine the fuel level.
After refueling, install the cap on the fuel tank.
Make sure that excess fuel is drained from the suction hose before storing the suction hose.
Wind the hose on the bracket. Place the end of the hose onto the holder.
To prevent hose damage, do not coil the hose in a tight radius.
Close the outside cover of the storage box.