ENGINE AR 2013831 - Caterpillar

(1) Torque for gage ... 45 6 N m (33 4 lb ft)(2) Torque for eight bolts ... 900 100 N m (660 75 lb ft)(3) Torque for bleeder screw ... 11 4 N m (8 3 lb ft)(4) Torque for pressure relief fitting ... 13 4 N m (10 3 lb ft)(5) Rubber toric seals and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. Seal must be assembled square with the bore and toric seal must not be bulged or twisted.(6) Torque for 22 bolts (each side) ... 300 40 N m (220 30 lb ft)(7) Torque for 8 bolts ... 300 40 N m (220 30 lb ft)