ENGINE AR 2056713 - Caterpillar

Illustration 1 g00524169
(1) Lubricate the threaded surfaces of the adjusting screws with 1P-0808 Multipurpose grease. (2) Torque for the four nuts ... 530 70 N m (400 50 lb ft) (3) Torque for the four bolts ... 530 70 N m (400 50 lb ft) (4) Thickness of one new 8E-9212 Shim ... 0.8 mm (.03 inch)Note: Use the required amount of 8E-9212 Shims.
Illustration 2 g00649769
(1) Torque for the four nuts ... 530 70 N m (400 50 lb ft) (2) Thickness of one new 8E-9212 Shim ... 0.8 mm (.03 inch)Note: Use 8E-9212 Shims in order to obtain a clearance of 0.2 mm (0.0079 inch) to 1 mm (0.039 inch) between the trunnion balls.