ENGINE AR-COMPLETE 2058603 - Caterpillar

2058603 ENGINE AR-COMPLETE Caterpillar parts D9T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2058603
205-8603
2058603

Weight: 4004 pounds 1816 kg.

Buy ENGINE AR-COMPLETE 2058603 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Related part:

2058603 LONG BLOCK 10R9370 R

2058603 ENGINE AR-COMPL 20R0516 R

2058603 SHORT BLOCK 20R5355 R

Show more prices Caterpillar parts

Compatible equipment models: 2058603:

TRACK-TYPE TRACTOR D9T Caterpillar

For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Turbocharged Engines
Disconnect the terminals at the battery.
Drain the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Drain the sea water circuit. Refer to Operation and Maintenance Manual, "Sea Water Strainer - Clean/Inspect" for more information.
Illustration 1 g00758463
Loosen the hose clamps from hose (1) and slide the hose toward the front of the engine.
Loosen the hose clamps from hose (3) and slide the hose upward.
Loosen the hose clamps from hose (5) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (6) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (2) and slide the hose toward the back of the engine.
Loosen the hose clamps from hose (4). Slide hose (4) toward the back of the engine. Remove water temperature regulator housing (7) from the heat exchanger.
Illustration 2 g00743960
Support the heat exchanger. Remove bolt (8) from the support bracket.
Support the heat exchanger and remove two bolts (9) from the support bracket.
Remove the heat exchanger from the engine.Naturally Aspirated Engines
Disconnect the terminals at the battery.
Drain the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Drain the sea water circuit. Refer to Operation and Maintenance Manual, "Sea Water Strainer - Clean/Inspect" for more information.
Illustration 3 g00743803
Loosen the hose clamps from hose (1) and slide the hose toward the front of the engine.
Loosen the hose clamps from hose (3) and slide the hose upward.
Loosen the hose clamp from hose (5) and remove the hose from the heat exchanger.
Remove the hose clamp from hose (6) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (2) and slide the hose toward the back of the engine.
Loosen the hose clamps from hose (4). Slide hose (4) toward the back of the engine. Remove water temperature regulator housing (8) from the heat exchanger.
Remove two bolts (7) that fasten the transmission oil cooler to the heat exchanger.
Illustration 4 g00758488
Support the heat exchanger. Remove bolt (9) from the support bracket.
Support the heat exchanger and remove two bolts (10) from the support bracket.
Remove the heat exchanger from the engine.