2071137 ENGINE AR-PRIMARY Caterpillar parts
3056E
Rating:
Alternative (cross code) number:
CA2071137
207-1137
2071137
CA2071137
207-1137
2071137
INDUSTRIAL ENGINE,
Compatible equipment models: 2071137:
For full view, you need register
Information:
New Half Flanges
New half flanges are now available for the connecting lines for hydraulic hammers. The new half flanges provide improved durability of the connecting lines. The new half flanges are made out of forged steel whereas the previous half flanges are made out of powdered metal. Refer to Table 1 for the new part numbers.Reference: Hose and Coupling Reference Guide, PECP5030
Table 1
Half Flanges
New Pt. No. Size of Flange Former Pt. No.
235-3569 -16 6V-0400
235-3570 -20 6V-0401 New High Vibration Couplings
New high vibration couplings are now available for the connecting lines for hydraulic hammers. The new 241-4318 Coupling As replaces the former 194-2507 Coupling As. The new high vibration couplings provide improved reliability and durability of the connecting lines. The new high vibration couplings are a permanent coupling.Revision 2.00 or higher of the Crimputer software is required in order to crimp the 241-4318 Coupling As with a Crimputer controlled hose assembly tool. Within this version of the software, the second step includes an option to crimp "Cat Couplings" or "Anchor Couplings". Select "Anchor Couplings", and proceed through the steps on the screen.In order to obtain Revision 2.00 of the Crimputer software, please contact one of the following:Rich Stear
(Development Engineer)
stear_rich_a
309-636-1213Jeff Curry
(Development Engineer)
curry_jeffory_t
309-636-1681Refer to Table 2 for the die sets that are required for each machine.
Table 2
Required Die Sets
Type of Hose XT-3 ES
Hose ID -20
Floor Model with Crimputer
145-5161 220-8686
Floor Model with Sony Controller
137-7238 134-5640
Combo Machine with Crimputer
145-3381 139-5439 152-3910
Noncurrent Floor Model
4C-3660 4C-5052 4C-5053 9U-5792 9U-7261 233-0346
Bench Model 150-3622
134-9572 Black Spacer Ring New Hose Clamp
New hose clamps are now available for the connecting lines for hydraulic hammers. The new 244-6808 Grommet replaces the former 146-6099 Grommet. The new grommet provides improved retention for the connecting lines.
New half flanges are now available for the connecting lines for hydraulic hammers. The new half flanges provide improved durability of the connecting lines. The new half flanges are made out of forged steel whereas the previous half flanges are made out of powdered metal. Refer to Table 1 for the new part numbers.Reference: Hose and Coupling Reference Guide, PECP5030
Table 1
Half Flanges
New Pt. No. Size of Flange Former Pt. No.
235-3569 -16 6V-0400
235-3570 -20 6V-0401 New High Vibration Couplings
New high vibration couplings are now available for the connecting lines for hydraulic hammers. The new 241-4318 Coupling As replaces the former 194-2507 Coupling As. The new high vibration couplings provide improved reliability and durability of the connecting lines. The new high vibration couplings are a permanent coupling.Revision 2.00 or higher of the Crimputer software is required in order to crimp the 241-4318 Coupling As with a Crimputer controlled hose assembly tool. Within this version of the software, the second step includes an option to crimp "Cat Couplings" or "Anchor Couplings". Select "Anchor Couplings", and proceed through the steps on the screen.In order to obtain Revision 2.00 of the Crimputer software, please contact one of the following:Rich Stear
(Development Engineer)
stear_rich_a
309-636-1213Jeff Curry
(Development Engineer)
curry_jeffory_t
309-636-1681Refer to Table 2 for the die sets that are required for each machine.
Table 2
Required Die Sets
Type of Hose XT-3 ES
Hose ID -20
Floor Model with Crimputer
145-5161 220-8686
Floor Model with Sony Controller
137-7238 134-5640
Combo Machine with Crimputer
145-3381 139-5439 152-3910
Noncurrent Floor Model
4C-3660 4C-5052 4C-5053 9U-5792 9U-7261 233-0346
Bench Model 150-3622
134-9572 Black Spacer Ring New Hose Clamp
New hose clamps are now available for the connecting lines for hydraulic hammers. The new 244-6808 Grommet replaces the former 146-6099 Grommet. The new grommet provides improved retention for the connecting lines.