ENGINE AR 2167826 - Caterpillar

2167826 ENGINE AR Caterpillar parts D10N

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2167826
216-7826
2167826

Weight: 6100 pounds 2766 kg.

Buy ENGINE AR 2167826 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Related part:

2167826 LONG BLOCK M 0R9360 R

2167826 SHORT BLOCK 10R6171 R

Compatible equipment models: 2167826:

TRACK-TYPE TRACTOR D10N Caterpillar

For full view, you need register

Information:

This diagnostic code is associated with the transmission solenoid 3. The FMI 13 diagnostic code is active when the ECM detects that the solenoid is in need of calibration.Note: Before performing this procedure, verify that no other active CID 1403 diagnostic codes exist for the solenoid. If any other diagnostic codes are active for the solenoid, correct the problem before performing this procedure. Test Step 1. CALIBRATION
Perform the calibration procedure for the solenoid. Refer to Testing and Adjusting, "Calibration" section of this manual for the correct calibration procedure. Expected Result:The calibration procedure was performed successfully.Results:
YES - The calibration procedure was performed successfully. Resume normal machine operation.STOP
NO - The calibration was not successful.Repair: Repeat the calibration procedure for the solenoid. If the second calibration procedure is not successful, replace the solenoid. After solenoid replacement, refer to Testing and Adjusting, "Calibration" section of this manual for the correct calibration procedure. If the problem is still present after replacement and calibration of the new solenoid, the ECM may have failed.Prior to replacing an ECM, always contact your dealership's Technical Communicator for possible consultation with Caterpillar. This consultation may greatly reduce repair time. If the cause of the diagnostic code is not found, replace the ECM. Refer to Testing and Adjusting, "Electronic Control Module (ECM) - Replace".STOP