2292636 ENGINE AR-CORE Caterpillar parts
C13
Rating:
Alternative (cross code) number:
CA2292636
229-2636
2292636
CA2292636
229-2636
2292636
TRUCK ENGINE,
Related part:
2292636
LONG BLOCK M
10R6464
R
2292636
SHORT BLOCK
10R7437
R
2292636
KIT-ENG OVERHAUL
10R9920
R
2292636
KIT-ENG OVERHAUL
10R9921
R
2292636
KIT-ENG OVERHAUL
10R9922
R
Compatible equipment models: 2292636:
For full view, you need register
Information:
Removal Procedure
Personal injury may occur from failure to properly service the batteries.Batteries give off flammable fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts the skin or eyes.Prevent sparks near the batteries. Sparks could cause vapors to explode. Do not allow jumper cable ends to contact each other or the engine. Improper jumper cable connections can cause an explosion.Always wear protective glasses when working with batteries.
Illustration 1 g01313885
Open the left side access doors (1).
Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
Illustration 2 g01314739
Remove nut (2). Remove covers (3) and (4).
Illustration 3 g01314741
Disconnect cable assembly (7) and (8). Remove cable assembly (5). Remove batteries (6). Repeat for the other batteries. Installation Procedure
Install batteries (6) In the reverse order of removal.
Personal injury may occur from failure to properly service the batteries.Batteries give off flammable fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts the skin or eyes.Prevent sparks near the batteries. Sparks could cause vapors to explode. Do not allow jumper cable ends to contact each other or the engine. Improper jumper cable connections can cause an explosion.Always wear protective glasses when working with batteries.
Illustration 1 g01313885
Open the left side access doors (1).
Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
Illustration 2 g01314739
Remove nut (2). Remove covers (3) and (4).
Illustration 3 g01314741
Disconnect cable assembly (7) and (8). Remove cable assembly (5). Remove batteries (6). Repeat for the other batteries. Installation Procedure
Install batteries (6) In the reverse order of removal.
