2292638 ENGINE AR-CORE Caterpillar parts
C13
Rating:
Alternative (cross code) number:
CA2292638
229-2638
2292638
CA2292638
229-2638
2292638
TRUCK ENGINE,
Related part:
2292638
LONG BLOCK M
10R6464
R
2292638
SHORT BLOCK
10R7437
R
2292638
KIT-ENG OVERHAUL
10R9920
R
2292638
KIT-ENG OVERHAUL
10R9921
R
2292638
KIT-ENG OVERHAUL
10R9922
R
Compatible equipment models: 2292638:
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00546869
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Note: Ensure that camshaft (2) is clean. Lubricate camshaft (2) with clean engine oil prior to installation.
Carefully install camshaft (2) in the engine.
Illustration 2 g00546803
Put thrust washer (1) in position. Make sure that thrust washer (1) is aligned with hollow dowel (X) .End By:
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
Install the rocker shaft assembly and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00546869
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Note: Ensure that camshaft (2) is clean. Lubricate camshaft (2) with clean engine oil prior to installation.
Carefully install camshaft (2) in the engine.
Illustration 2 g00546803
Put thrust washer (1) in position. Make sure that thrust washer (1) is aligned with hollow dowel (X) .End By:
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
Install the rocker shaft assembly and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".