2349223 ENGINE AR-CORE Caterpillar parts
C18
Rating:
Alternative (cross code) number:
CA2349223
234-9223
2349223
CA2349223
234-9223
2349223
MARINE ENGINE,
Related part:
2349223
SHORT BLOCK
10R9368
R
Compatible equipment models: 2349223:
For full view, you need register
Caterpillar SIS machinery equipment:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3095 Puller Handle 1
B 6V-4194
(1) Valve Seat Extractor 1
1U-9167
(1) Valve Seat Extractor 1
( 1 ) For use with Exhaust Valve Seat
( 1 ) For use with Intake Valve SeatStart By:
Remove inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Illustration 1 g01137634
Use Tooling (A) and Tooling (B) to remove valve seat inserts (1) .Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 4C-6372 (1) Valve Seat Driver 1
364-4009 (1) Valve Seat Driver 1
( 1 ) For use with Exhaust Valve Seat
( 1 ) For use with Intake Valve Seat
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137637
Note: Do not machine the prefinished valve seat inserts in order to correct the valve stem projection. An excessive valve stem projection indicates that the valve seat insert is not seated or material was not cleaned from the bottom of the counterbore.
Lower the temperature of new valve seat inserts (1) . Use Tooling (C) to install valve seat inserts (1) into the cylinder head.End By: Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3095 Puller Handle 1
B 6V-4194
(1) Valve Seat Extractor 1
1U-9167
(1) Valve Seat Extractor 1
( 1 ) For use with Exhaust Valve Seat
( 1 ) For use with Intake Valve SeatStart By:
Remove inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Illustration 1 g01137634
Use Tooling (A) and Tooling (B) to remove valve seat inserts (1) .Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 4C-6372 (1) Valve Seat Driver 1
364-4009 (1) Valve Seat Driver 1
( 1 ) For use with Exhaust Valve Seat
( 1 ) For use with Intake Valve Seat
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137637
Note: Do not machine the prefinished valve seat inserts in order to correct the valve stem projection. An excessive valve stem projection indicates that the valve seat insert is not seated or material was not cleaned from the bottom of the counterbore.
Lower the temperature of new valve seat inserts (1) . Use Tooling (C) to install valve seat inserts (1) into the cylinder head.End By: Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".