2371833 ENGINE AR-COMPLETE Caterpillar parts
C7
Rating:
Alternative (cross code) number:
CA2371833
237-1833
2371833
CA2371833
237-1833
2371833
TRUCK ENGINE,
Compatible equipment models: 2371833:
For full view, you need register
Information:
SMCS Code: 4050-535-FLV
Illustration 1681. Position one final drive so that oil drain plug (1) is at the bottom. Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.2. Remove oil level plug (2).3. Check the oil level. The oil should be near the bottom of the level plug opening.4. Add oil through the level plug opening, if necessary. Overfilling the final drive will cause the seals on the travel motor to allow hydraulic oil or water to enter the final drive. This may contaminate the final drive.5. Clean oil level plug (2). Inspect the O-ring seal. Replace the O-ring seal if the O-ring seal is worn or damaged.6. Install oil level plug (2).7. Repeat the procedure for the other final drive.
Illustration 1681. Position one final drive so that oil drain plug (1) is at the bottom. Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.2. Remove oil level plug (2).3. Check the oil level. The oil should be near the bottom of the level plug opening.4. Add oil through the level plug opening, if necessary. Overfilling the final drive will cause the seals on the travel motor to allow hydraulic oil or water to enter the final drive. This may contaminate the final drive.5. Clean oil level plug (2). Inspect the O-ring seal. Replace the O-ring seal if the O-ring seal is worn or damaged.6. Install oil level plug (2).7. Repeat the procedure for the other final drive.
