2379565 ENGINE AR-COMPLETE Caterpillar parts
3456
Rating:
Alternative (cross code) number:
CA2379565
237-9565
2379565
CA2379565
237-9565
2379565
GENERATOR SET,
Compatible equipment models: 2379565:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fan assembly. Refer to Disassembly and Assembly, "Fan - Remove and Install" in this manual.
Remove the V-belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" in this manual.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to touch with the bare hand.Remove the filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. The capacity of the cooling system is approximately17 L (4.5 US gal).
Illustration 1 g00355937
Remove four bolts (1). Remove water pump pulley (2) .
Illustration 2 g00355938
Loosen clamp (3). Disconnect hose (4) .
Loosen clamp (8). Disconnect hose (5) .
Loosen clamp (7). Disconnect hose (6) .
Remove seven bolts (10). Remove water pump (9) .
Remove the gasket that is behind the water pump.
Start By:
Remove the fan assembly. Refer to Disassembly and Assembly, "Fan - Remove and Install" in this manual.
Remove the V-belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" in this manual.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to touch with the bare hand.Remove the filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. The capacity of the cooling system is approximately17 L (4.5 US gal).
Illustration 1 g00355937
Remove four bolts (1). Remove water pump pulley (2) .
Illustration 2 g00355938
Loosen clamp (3). Disconnect hose (4) .
Loosen clamp (8). Disconnect hose (5) .
Loosen clamp (7). Disconnect hose (6) .
Remove seven bolts (10). Remove water pump (9) .
Remove the gasket that is behind the water pump.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts engine Caterpillar catalog:
2640207
ENGINE AR
3406C
3406C
2640206
ENGINE AR
3406C
3406C
2377194
ENGINE AR
3406C
3406C