2382021 ENGINE AR-CORE Caterpillar parts
C13
Rating:
Alternative (cross code) number:
CA2382021
238-2021
2382021
CA2382021
238-2021
2382021
TRUCK ENGINE,
Related part:
2382021
LONG BLOCK M
10R6464
R
2382021
SHORT BLOCK
10R7437
R
2382021
KIT-ENG OVERHAUL
10R9920
R
2382021
KIT-ENG OVERHAUL
10R9921
R
2382021
KIT-ENG OVERHAUL
10R9922
R
Compatible equipment models: 2382021:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
Removal Procedure
Start By:
Remove the fan.
Remove the serpentine belt. Refer to Operation and Maintenance Manual, "Belt- Remove and Install".
Illustration 1 g01306599
Remove plug (1). Use a suitable pin in order to ensure that the crankshaft does not rotate.
Illustration 2 g01306601
Remove bolts (3) and damper (2).
Illustration 3 g01306602
Remove bolts (5) and retainer (6). Remove the adapter and pulley (4) as a unit.
Illustration 4 g01306603
Remove pulley (7) from adapter (8). Installation Procedure
Illustration 5 g01306603
Install adapter (8) to pulley (7).
Illustration 6 g01306602
Install the adapter and pulley (4) as a unit. Install retainer (6) and bolts (5). Tighten bolts (5) to a torque of 200 N m (148 lb ft).
Illustration 7 g01306601
Install damper (2) and bolts (3). Tighten bolts (3) to a torque of 115 N m (85 lb ft).
Illustration 8 g01306599
Remove the suitable pin. Install plug (1). Install the serpentine belt. Refer to Operation and Maintenance Manual, "Belt- Remove and Install". End By:
Install the fan.
Start By:
Remove the fan.
Remove the serpentine belt. Refer to Operation and Maintenance Manual, "Belt- Remove and Install".
Illustration 1 g01306599
Remove plug (1). Use a suitable pin in order to ensure that the crankshaft does not rotate.
Illustration 2 g01306601
Remove bolts (3) and damper (2).
Illustration 3 g01306602
Remove bolts (5) and retainer (6). Remove the adapter and pulley (4) as a unit.
Illustration 4 g01306603
Remove pulley (7) from adapter (8). Installation Procedure
Illustration 5 g01306603
Install adapter (8) to pulley (7).
Illustration 6 g01306602
Install the adapter and pulley (4) as a unit. Install retainer (6) and bolts (5). Tighten bolts (5) to a torque of 200 N m (148 lb ft).
Illustration 7 g01306601
Install damper (2) and bolts (3). Tighten bolts (3) to a torque of 115 N m (85 lb ft).
Illustration 8 g01306599
Remove the suitable pin. Install plug (1). Install the serpentine belt. Refer to Operation and Maintenance Manual, "Belt- Remove and Install". End By:
Install the fan.