2421357 ENGINE AR-PRIMARY Caterpillar parts
953D
Rating:
Alternative (cross code) number:
CA2421357
242-1357
2421357
CA2421357
242-1357
2421357
Weight: 1220 pounds 553 kg.
TRACK LOADER,
Related part:
2421357
BLOCK GP-LONG
20R2454
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replacement Part Fits for KitchenAid KSRU25CRBL00 Refrigerator Icemaker Ice Maker icepart#2421357
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Model: KSRU25CRBL00. Model: KSRU25CRBL00
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Model: KSRU25CRBL00. Model: KSRU25CRBL00
For full view, you need register
Compatible equipment models: 2421357:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0411 Shackle As 2 Note: The cooling system components and weights may vary depending on your arrangement.Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Use caps and plugs on all lines, hoses, and tubes in order to prevent fluid loss or contamination of the systems.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" or Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change".
Illustration 1 g01225862
Disconnect harness assemblies (2) .
Disconnect tube assemblies (1) .
Illustration 2 g01225865
Disconnect tube assembly (3) .
Illustration 3 g01225867
Disconnect elbow (4) .
Illustration 4 g01225892
Remove guard assemblies (5) .
Illustration 5 g01225893
Remove belts (6) .
Illustration 6 g01225897
Attach Tooling (A) and a suitable lifting device to radiator group (7) . The weight of radiator group (7) is approximately 2050 kg (4500 lb).
Illustration 7 g01225901
Illustration 8 g01225902
Remove bolts (8) and bolts (9) from both sides.
Illustration 9 g01225904
Move radiator group (7) away from engine (10) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0411 Shackle As 2 Note: The cooling system components and weights may vary depending on your arrangement.Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Use caps and plugs on all lines, hoses, and tubes in order to prevent fluid loss or contamination of the systems.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" or Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change".
Illustration 1 g01225862
Disconnect harness assemblies (2) .
Disconnect tube assemblies (1) .
Illustration 2 g01225865
Disconnect tube assembly (3) .
Illustration 3 g01225867
Disconnect elbow (4) .
Illustration 4 g01225892
Remove guard assemblies (5) .
Illustration 5 g01225893
Remove belts (6) .
Illustration 6 g01225897
Attach Tooling (A) and a suitable lifting device to radiator group (7) . The weight of radiator group (7) is approximately 2050 kg (4500 lb).
Illustration 7 g01225901
Illustration 8 g01225902
Remove bolts (8) and bolts (9) from both sides.
Illustration 9 g01225904
Move radiator group (7) away from engine (10) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts engine Caterpillar catalog:
1113963
ENGINE AR
3306C
3306C
1113978
ENGINE AR
3306C
3306C
1113975
ENGINE AR
3306C
3306C
3924133
ENGINE AR-PRIMARY
906H2, 907H2, 908H2
906H2, 907H2, 908H2
3076952
ENGINE AR-COMPLETE
C15, TH35-C15T
C15, TH35-C15T
1008324
ENGINE AR
3516
3516
2421356
ENGINE AR-PRIMARY
D6K, D6K LGP, PL61
D6K, D6K LGP, PL61
3059695
ENGINE AR-COMPLETE
C15, TH35-C15T
C15, TH35-C15T