ENGINE AR-CORE 2433185 - Caterpillar

Note: The illustrations that follow show the LH side of the seat. Repeat the procedure for the RH side of the seat.
Illustration 1 g01093997
Typical Cab Seat (1) 9X-2043 Screws (2) 227-6807 Guard (C) Wiring Harness
Remove the four screws (1) from the console group. Retain the screws for use in Step 3.
Remove the guard (2). Discard the guard.
Illustration 2 g01094035
Typical Cab Seat (1) 9X-2043 Screws (4) 250-2556 Angle (C) Wiring Harness
Install the new angle (4). Use the four screws (1) that were retained in Step 1.Machines That Are Configured With The 240-3069 Angle
Certain machines may have been configured with the addition of the former 240-3069 Angle. The effectivity of the 240-3069 Angle is listed in Table 3. The procedure that follows applies to those machines.Note: The illustrations that follow show the LH side of the seat. Repeat the procedure for the RH side of the seat.
Table 3
Effectivity Of The 240-3069 Angle    
Model    Effectivity    
311C     S/N:CKE1181-1303 and S/N:; CLK2393-2540    
312C     S/N:CAE2057-2309 and S/N:; FDS339-362    
312C L     S/N:CBA1762-2136    
315C     S/N:AKE197 and S/N:; BTL182-186    
315C L     S/N:CJC1216-1721 and S/N:; ANF387-UP    
318C     S/N:FAA339-UP, S/N:; GPA267-325, S/N:; BTG253-UP, S/N:; DAH325-UP, S/N:; CWP165-180, and S/N:; MDY275-381    
320C     S/N:FBA3651-4438, S/N:; MAA326-378, S/N:; MAB404, S/N:; AMC3955-4428, and S/N:; DBG424-UP    
320C L     S/N:EGA303-UP, S/N:; GAA505-577, S/N:; GLA1070-UP, S/N:; PAA345-354, S/N:; ANB3840-4031, S/N:; PAB1861-2294, and S/N:; HBC213    
320C U     S/N:FBB1297-1533 and S/N:; MAC293-296    
320C S     S/N:EGL395-UP    
320C LN     S/N:JTG622-UP    
320C LU     S/N:GAB297-317    
320C LRR     S/N:PAC458-563    
320C FM     S/N:SAH263-306 and S/N:; TBR176-180    
322C     S/N:DAA163-173, S/N:; HBG128, and S/N:; ADX141-150    
322C L     S/N:FED197-245, S/N:; BTE161-179, S/N:; KCF139-143, S/N:; HEK499-760, and S/N:; MAR255-UP    
322C LN     S/N:EMR303-UP    
322C FM     S/N:M2H290-UP, S/N:; BYL179-UP, S/N:; C3R307-UP, and S/N:; LAR205-UP    
325C     S/N:BLA214, S/N:; BKH351-355 and S/N:; BKW273-284    
325C L     S/N:CRB789-UP, S/N:; BFE1214-1515, S/N:; BMM421-525, S/N:; BKT342-350, and S/N:; BLX308-311    
325C LN     S/N:CSJ947-UP    
325C MH     S/N:S2C154-169    
325C FM     S/N:S3M333-UP and S/N:; Y4P403-406    
330C     S/N:JAB656-721, S/N:; JCD299-UP, S/N:; GAG348-390, S/N:; BTM194-204, and S/N:; MKM310-UP    
330C L     S/N:HAA417-466, S/N:; KDD620-823, S/N:; RBH238-248, S/N:; JNK260-UP, S/N:; CAP1257-UP, and S/N:; DKY2056-2610    
330C LN     S/N:CGZ542-UP    
330C MH     S/N:D3C248-270    
330C FM     S/N:B1K191-UP, S/N:; B2L213-227, S/N:; B3M199-UP, and S/N:; B4N192-UP    
Illustration 3 g01098193
(1) 9X-2043 Screw (3) 240-3069 Angle (C) Wiring Harness
Remove the four screws (1) from the console group. Retain the screws for use in Step 3.
Remove angle (3). Discard the angle.
Install the new angle (4). Use the four screws (1) that were retained in Step 1. The location of the new angle is shown in Illustration 2.