AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 2444552 - Caterpillar


2444552 ENGINE AR-COMPLETE Caterpillar parts C15
Rating:
28
Alternative (cross code) number:
CA2444552
244-4552
2444552
Caterpillar 2444552 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444552 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2444552:

TRUCK ENGINE  C15   Caterpillar
  For full view, you need register

Information:


Table 2
Required Tools    
Tool     Pt. No.     Description     Qty    
(A)     FT-2674     Vacuum Cap     1    
Illustration 5 g02262633
Install adapter assemblies (12) and (13) into valve assembly (5) .
Install connector assembly (6) into valve (5). Connect elbow assembly (19) to connector assembly (6). Connect adapter assembly (22) to elbow assembly (19).
Install elbow assembly (18) into valve assembly (5). Connect adapter assembly (28) to elbow assembly (18). Install cap assemblies (28) onto adapter assemblies (22) .
Illustration 6 g02262653
Position support assembly (11) as shown. Install support assembly (11) using bolts (27) and washers (31). Install valve assembly (5) to support assembly (11) using bolts (29) and washers (32) .
Release the hydraulic system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release" or Disassembly and Assembly Manual, "System Pressure - Release".Note: It is necessary to install a vacuum transducer on the hydraulic tank in order to create a vacuum on the hydraulic system. Install a vacuum transducer before any hydraulic lines are connected or disconnected. If a vacuum transducer cannot be installed, the hydraulic tank must be drained of hydraulic oil. Refer to your Operation and Maintenance Manual for the procedure to drain the hydraulic tank of oil.
Illustration 7 g01279237
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system.
Illustration 8 g02262655
Install guard (3) onto the existing hose assembly as shown using straps (2) .
Connect hose assembly (8) to adapter assembly (13) installed in port T. Connect hose assembly (9) to adapter assembly (13) installed in port P. Disconnect existing hose assembly (A) .
Illustration 9 g02262753
Connect adapter assembly (20) to existing fitting (B). Connect existing hose assembly (A) to adapter assembly (20).
Connect adapter assembly (15) to adapter assembly (20). Connect reducer assembly (21) to adapter assembly (15). Connect hose assembly (8) to reducer assembly (21) .
Illustration 10 g02265493
Connect adapter assembly (14) to flange (7). Connect elbow assembly (24) to adapter assembly (14) .
Illustration 11 g02263497
bottom of main control valve
Disconnect existing hose assembly (C) from the main control valve. Position flange (7) with seal (25) to the main control valve. Use existing hardware and bolts (30) to install flange (7) and connect hose assembly (C) .
Illustration 12 g03727888
Install shuttle valve (1) in the main control valve as shown.
Install connector assembly (23) into the main control valve as shown. Connect shuttle valve (4) to connector assembly (23). Connect elbow assemblies (17) to shuttle valve (14 ) using seals (26) .
Connect hose assembly (10) to elbow assembly (17A) and adapter assembly (12) .
Tighten all hardware to standard torque. Refer to Specifications, SENR3130, "Torque Specifications".
Illustration 13 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.