AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 2444575 - Caterpillar


2444575 ENGINE AR-COMPLETE Caterpillar parts C-15
Rating:
10
Alternative (cross code) number:
CA2444575
244-4575
2444575
Caterpillar 2444575 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444575 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2444575:

TRUCK ENGINE  C-15   Caterpillar
  For full view, you need register

Information:


Illustration 20 g01389212
Within the "CONTROL VALVE" menu, press the down key (6) in order to highlight "A3 VALVE RETRACT".
When the "A3 VALVE RETRACT" option is highlighted, press the OK key (8) .
Illustration 21 g01389213
The monitor will begin to communicate with the ECM. This may take a few moments. When the communication link is established, the monitor will display the calibration screen.
Illustration 22 g01200825
(L) Lower limit (U) Upper limit (C) Current Value (S) "STEP NUMBER" and "STEP NAME"
After the OK key is pressed, the "CALIBRATION TITLE" will appear. The "CALIBRATION TITLE" screen allows the upper limitation and the lower limitation to be set. Refer to Illustration 22.Note: The title of the calibration and the name of the step will change in accordance to the procedure that is being performed. "CALIBRATION TITLE" and "STEP NAME" are used in this document as an example.Note: In the "CALIBRATION TITLE" screen, "STEP No" is displayed in blue. The "OPERATION GUIDANCE" will be displayed in green.
Illustration 23 g01389216
When a pressure gauge is connected to the pressure tap for retract solenoid valve (11) for the auxiliary control valve, press the OK key (8) .Note: The "HYD OIL TEMP / ENGINE SPEED" screens are available during the process of calibration by pressing the up key (1) or the down key (6) .
Illustration 24 g01389217
Release all controls. When all controls are in the neutral position, press the OK key (8) .
Illustration 25 g01389219
Hold the attachment controls in the position of operation. Press the OK key (8) .
Illustration 26 g01389220
Press the right key (2) in order to increase the value. Press the left key (5) in order to decrease the value. Adjust the value until the gauge pressure is within the specification.
Press the device for activation 3 times and release the device for activation 3 times.Note: Pressing the device for activation three times ensures that an accurate reading will result.
Press and hold the device for activation to the OPERATING position. While you hold the device for activation, verify that the setting is correct. If the value of the setting is not correct, repeat Step 8 through Step 10.
When the value is within the specification, press the OK key (8) .
Illustration 27 g01389223
After the OK key is pressed the monitor will automatically continue with the tuning of the next pressure value. Hold the attachment controls in the position of operation. Press the OK key (8) .
Illustration 28 g01389224
Press the right key (2) in order to increase the value. Press the left key (5) in order to decrease the value. Adjust the value until the gauge pressure is within the specification.
Illustration 29 g01389234
Release all controls. When all controls are in the neutral position, press the OK key (8) .
Illustration 30 g01389225
The calibration is complete. Press the cancel key (7) in order to exit the process of calibration.
Illustration 31 g01389227
The "ERROR ID" screen will be displayed on the monitor if an error occurs. The process of calibration will not be saved and the process must be restarted.


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.