AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 2444603 - Caterpillar



2444603 ENGINE AR-COMPLETE Caterpillar parts C13 ENGINE
Rating:
19
Alternative (cross code) number:
CA2444603
244-4603
2444603
Caterpillar 2444603 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444603 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2444603:

TRUCK ENGINE  C13   Caterpillar
  For full view, you need register

Information:


Illustration 2 g03447626
Soak U-cup seal (24) and wiper seal (25) in warm hydraulic oil prior to assembly. Warm the hydraulic oil to a temperature of 38° 5°C (100° 9°F). Install U-cup seal (24) and wiper seal (25) into piston sleeve (21) .
Illustration 3 g03447623
Lubricate O-ring seals (23) with clean hydraulic oil. Install O-ring seals (23) onto piston sleeve (21) .
Illustration 4 g03448124
Install piston sleeve (21) into head (22) .
Illustration 5 g03447556
Attach Tooling (C) and a suitable lifting device to piston (20) . Refer to Table 2 for the approximate weight of piston (20) . Lubricate piston (20) with clean hydraulic oil. Install piston (20) .
Table 2
Sales Model     Piston (20)
Approximate Weight    
H75E    
19 kg (42 lb)    
H95E    
68 kg (150 lb)    
Illustration 6 g03447536
Soak buffer seal (17) , U-cup seal (18) , and U-cup seal (19) in warm hydraulic oil prior to assembly. Warm the hydraulic oil to a temperature of 38° 5°C (100° 9°F). Install buffer seal (17) , U-cup seal (18) , and U-cup seal (19) .
Lubricate O-ring seals (16) with clean hydraulic oil. Install O-ring seals (16) .
Illustration 7 g03480196
Note: Fill the threaded hole of piston (20) with clean hydraulic oil.
Install carrier (15) onto piston (20) .
Illustration 8 g03447490
Apply Tooling (E) to the threads of plugs (14) and fitting (13) . Lubricate the O-ring seals with lubricant that is being sealed. Install the O-ring seals and plugs (14) . Install fitting (13) . Install the O-ring seals and plugs (12) .
Illustration 9 g03447489
Lubricate O-ring seal (6) with clean hydraulic oil. Install O-ring seal (6) on accumulator base (7) .
Lubricate both sides of accumulator diaphragm (8) with clean hydraulic oil at assembly. Apply Tooling (F) to the threads of bolts (11) . Install accumulator base (7) , accumulator diaphragm (8) , accumulator cover (9) , washers (10) , and bolts (11) . Tighten bolts (11) in a cross pattern.
Illustration 10 g03447486
Note: Make sure valve body (5) is fully seated against the head before bolts (4) are installed. Damage may occur if Tooling (F) gets into the head assembly.
Attach Tooling (A) and a suitable lifting device to valve body (5) . The weight of valve body (5) is approximately 77 kg (170 lb). Apply Tooling (F) to the threads of bolts (4) . Install valve body (5) , the washers, and bolts (4) . Torque bolts (4) in a cross pattern to a torque of 500 N m (370 lb ft). Torque bolts (4) again in a cross pattern to a torque of 1500 N m (1105 lb ft).
Illustration 11 g03447485
Lubricate the O-ring seal with clean hydraulic oil. Install the O-ring seal and plug (2) . Tighten plug (2) to a torque of 16.0 1.5 N m (142 13 lb in).
Lubricate the O-ring seal with clean hydraulic oil. Install the O-ring seal and plug (3) . Tighten plug (3) to a torque of 16.0 1.5 N m (142 13 lb in).
Refer to Test and Adjust, "Hydraulic Accumulator - Test and Charge" for the

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.