AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 2444655 - Caterpillar


2444655 ENGINE AR-COMPLETE Caterpillar parts C15
Rating:
42
Alternative (cross code) number:
CA2444655
244-4655
2444655
Caterpillar 2444655 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444655 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2444655:

TRUCK ENGINE  C15   Caterpillar
  For full view, you need register

Information:


Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-0455 Liner Projection Tool Group 1
Illustration 1 g01343897
(1) Dial indicator
(2) Gauge body
(3) Gauge block
Use the Tooling (A) to check the depths of the inlet valves and the exhaust valves below the face of the cylinder head. Use the gauge block (3) to zero the dial indicator (1).
Ensure that the face of the valves are clean. Ensure that the bottom face of the cylinder head is clean. Ensure that the cylinder head is not distorted. Refer to Systems Operation, Testing and Adjusting, "Cylinder Head - Inspect" for the procedure to measure flatness of the cylinder head.
Illustration 2 g01343900
Typical example
Measurement of the valve depth
(1) Dial indicator
(2) Gauge body
Position gauge body (2) and dial indicator (1) in order to measure the valve depth. Measure the depth of the inlet valve and the exhaust valve before the valve springs are removed.
For the minimum and maximum limits for a new engine for the inlet valves and the exhaust valves, refer to Specifications, "Cylinder Head".
Service wear occurs on an engine which has been in operation. If the valve depth below the cylinder head face on a used engine exceeds the specification for service wear, the following components must be replaced.
Valves
Valve insertsFor the wear limits for the inlet valves and exhaust valves, refer to Specifications, "Cylinder Head".
Check each valve for cracks. Check the stems of the valves for wear. Ensure that the valves are the correct fit in the valve guides. Refer to Systems Operation, Testing and Adjusting, "Valve Guide - Inspect" for the procedure to inspect the valve guides.
Check the load on the valve springs. Refer to Specifications, "Cylinder Head Valves" for the correct lengths and specifications for the valve springs.


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.