AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 2444672 - Caterpillar


2444672 ENGINE AR-COMPLETE Caterpillar parts C7
Rating:
45
Alternative (cross code) number:
CA2444672
244-4672
2444672
Caterpillar 2444672 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444672 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2444672:

TRUCK ENGINE  C7   Caterpillar
  For full view, you need register

Information:

(13) Remove ring AX (42) with a pin-pointed marking-off wire after removal of wiper (41). * Use care not to damage housing seal pocket and plunger section. (14) Pull out plunger from housing. * Do not pull out plunger all at once. Pull slowly while confirming the fitness with housing.* To ensure correct reassembly, attach an identification tag immediately after plunger is removed. Also check the direction in which the plunger goes into the housing. (15) Hydraulic pack section (T and V6 Plunger) Loosen hexagon socket bolts (72) (73), then remove spring washers (13), cover (70) and cover (90). (16) Since this is a blind cap, do not disassemble in a routine check. (17) Attach the spring compressor to both ends of guide (71) and insert it in by tapping lightly with a soft hammer.* Insert it in the shorter cover side. (18) Loosen both end caps (69) and (91) with a torque wrench. (19) If the shorter cover side is loose (Port A side) 1. Remove cap (69). * Since spring (66) is normally attached with a


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.