AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 2444752 - Caterpillar



2444752 ENGINE AR-COMPLETE Caterpillar parts C-10 ENGINE
Rating:
80
Alternative (cross code) number:
CA2444752
244-4752
2444752
Caterpillar 2444752 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444752 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2444752:

TRUCK ENGINE  C-10   Caterpillar
  For full view, you need register

Information:


Failure to comply to the rated load can cause possible personal injury or property damage. This includes the risk of unintended boom lowering. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations.
Note: Rated loads should be used as a guideline. Work tools, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.
Illustration 1 g01581393The information plate (1) for the fork tines is located on the upper left of the carriage on the pallet fork. Refer to , "Plate Locations and Film Locations" for additional information.
Table 1
Tine As
Machine Ar Fork Tine As Part Number Load Center of Fork Tine Load Capacity of Fork Tine (per fork tine)
924Gz - 938H 315-1414 610 mm (24 inch) 4400 kg (9700 lb)
924Gz - 938H 314-7445 762 mm (30 inch) 3295 kg (7260 lb)
924Gz - 938H 315-1415 914 mm (36 inch) 2925 kg (6450 lb)
950H - 972H 315-1416 762 mm (30 inch) 7953 kg (17530 lb)
950H - 972H 312-6432 914 mm (36 inch) 6725 kg (14825 lb)
950H - 972H 315-1417 1067 mm (42 inch) 5673 kg (12505 lb)
950H - 972H 315-1419 1219 mm (48 inch) 5050 kg (11130 lb)
950K/M, 962K/M, 966K/M, 972K/M, 963D/K 379-0019 915 mm (36 inch) 7400 kg (16315 lb)
379-0020
950K/M, 962K/M, 966K/M, 972K/M, 963D/K 378-9995 762 mm (30 inch) 8900 kg (19622 lb)
378-9996
950K/M, 962K/M, 966K/M, 972K/M, 963D/K 379-0015 1219 mm (48 inch) 5650 kg (12456 lb)
379-0016
950K/M, 962K/M, 966K/M, 972K/M, 963D/K 388-1947 610 mm (24 inch) 11100 kg (24471 lb)
388-1948
950K/M, 962K/M, 966K/M, 972K/M, 963D/K 336-4974 1067 mm (42 inch) 6350 kg (14000 lb)
336-4975 Load Curves
For information on load curves for the pallet forks, refer to Product Bulletin, GEJQ0224, "Caterpillar Fusion Pallet Forks for 924-972, IT38, IT62, G-Series, H-Series, and K-Series Wheel Loaders".

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.