AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 2444783 - Caterpillar


2444783 ENGINE AR-COMPLETE Caterpillar parts C13
Rating:
41
Alternative (cross code) number:
CA2444783
244-4783
2444783
Caterpillar 2444783 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444783 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2444783:

TRUCK ENGINE  C13   Caterpillar
  For full view, you need register

Information:


Illustration 1 g02966377
Remove the external plug.
Remove retaining pin in order to remove the tool from the hammer.
Inspect the retaining pins for the hammer tool. Remove any burrs from the retaining pins. Refer to the Operation and Maintenance Manual, "Tool Retaining Pins - Inspect/Replace".
Replace the pin if the pin has excessive wear or if the pin is cracked.
Illustration 2 g02434337
Check the hammer tool for wear. If necessary, grind the burrs off the hammer tool. Inspect the notch for the retaining pins. Remove any burrs.
When you measure the wear of the tool, measure the part of the tool (A) that is in the upper tool bushing and the part of the tool (C) that is in the lower tool bushing.
Measure dimension (B) of the tool.
Inspect the tool for cracks. If the tool is cracked, replace the tool.Note: Do not weld a tool to repair. Welding causes cracks on the surface of the tool. Welding can cause failure due to metal fatigue.


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.