parts catalog

ENGINE AR-COMPLETE 2444842 - Caterpillar

2444842 ENGINE AR-COMPLETE Caterpillar parts C-12
Alternative (cross code) number:
Caterpillar 2444842 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 2444842 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2444842:

TRUCK ENGINE  C-12   Caterpillar
  For full view, you need register


Illustration 1 g01991853
(1) Stick cylinder group (2) Fore boom cylinder (3) Stick group (4) Stub boom groupNote: All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the stub boom group and the cylinder pin bores. (5) Lubricate the sealing lip of two lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install two lip type seals so that the lip type seals do not extend beyond the face of the boss.Note: Install the sleeve bearing (6) in the bore so that the part number of each sleeve bearing is facing outward. (6) 228-5617 Sleeve Bearing Inside diameter ... 100.29 0.04 mm (3.948 0.002 inch) Outside diameter ... 116.230 0.013 mm (4.5760 0.0005 inch) Installation depth of the sleeve bearing ... 9.5 0.8 mm (0.37 0.03 inch) (7) 113-2963 Pin As Pin diameter ... 89.850 0.025 mm (3.5374 0.0010 inch) Bore diameter for the pin ... 90.043 0.043 mm (3.5450 0.0017 inch) (8) 131-8552 Pin As Pin diameter ... 79.850 0.025 mm (3.1437 0.0010 inch) Bore diameter for the pin assembly ... 80.037 0.037 mm (3.1511 0.0015 inch) (9) 234-3803 Pin As Pin diameter ... 99.85 0.04 mm (3.931 0.002 inch) Bore diameter for the pin assembly ... 100.043 0.043 mm (3.9387 0.0017 inch) (10) As required, use the following shims in order to adjust the following maximum lateral clearance. The steel shim should be located at the boom side: Lateral clearance except for Gosselies facility ... 0.8 mm (0.03 inch) Lateral clearance for Gosselies facility ... 1.0 mm (0.04 inch) 133-2427 Shim Thickness of one shim ... 0.5 mm (0.02 inch) 093-0090 Shim Thickness of one shim ... 1.0 mm (0.04 inch)

Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.