ENGINE AR-COMPLETE 2469419 - Caterpillar

Illustration 27 g02609380
Install boot (20). Install clamp (22). Install retainer (21). Install hose assemblies (19). Install fittings (18).
Illustration 28 g02609379
Install hoses (17). Install bracket (16).
Illustration 29 g02609377
Illustration 30 g02551745
Attach a suitable lifting device to Tooling (D). The weight of Tooling (D) is approximately 95 kg (210 lb). Remove plate (10). Drive pin toward the boom. (13) to remove Tooling (D). Remove pin (15). Remove Tooling (D).
Illustration 31 g02566684
Illustration 32 g02609038
Attach a suitable lifting device to boom cylinder (12). The weight of boom cylinder (12) is approximately 181 kg (400 lb). Lower boom cylinder (12) onto Tooling (C). Position boom cylinder (12). Install pin (15) and spacers.
Illustration 33 g02564118
Install hoses (14).
Illustration 34 g02566686
Illustration 35 g02566718
Position boom cylinder (12), as shown. Drive pin (13) into position. Install plate (10) and bolts (11). Connect hose assembly (9).
Drain the final drives into a suitable container.
Illustration 36 g02610897
Illustration 37 g02610898
Remove two bolts (1) and install Tooling (A), as shown. Remove remaining bolts (1). Tighten forcing screws (3) to remove the cover (2) from the final drive. Remove the cover (2) while holding the ring gear against the sprocket housing.
Illustration 38 g02611717
Illustration 39 g02610902
Place bolt (1) in the ring gear to hold in position, as shown. Install sun gear (4).
Illustration 40 g02610898
Illustration 41 g02610897
Apply Tooling (A) onto the cover (2). Install cover (2) and bolts (1). Apply Tooling (A) to screws (3). Install screws (3) flush with cover (2). Refill with oil.