ENGINE AR-COMPLETE 2469660 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Note: In addition to an oil level gauge, your machine is equipped with an automated function for checking fluid levels. Refer to Operation and Maintenance Manual, "Monitoring System" regarding the warnings and messages regarding the fluid level.
Illustration 1 g03358723
Park the machine as shown above. Note: In order to check the hydraulic system oil level accurately, the following conditions must be met:
Machine is parked on level ground
Steering wheels are straight and not turned
Stabilizers are raised completely
Stick is vertical
End of the stick is 2.5 m (8 ft) from the ground
Cab is lowered completely to the ground
Illustration 2 g03332220
The hydraulic oil level gauge is located on the left side of the hydraulic tank
For a machine that is at normal operating temperature, maintain the hydraulic oil between (A) and (B). Note: The machine must be positioned correctly in order to check the hydraulic system oil level accurately. Refer to step 1.Note: The oil level on the sight gauge should be no more than 75% full.
Add oil if necessary. Do not overfill the hydraulic tank. See Operation and Maintenance Manual, "Hydraulic System Oil - Change" Note: See Operation and Maintenance, "Lubricant Viscosities".