2569143 ENGINE AR-COMPLETE Caterpillar parts
C11
Rating:
Alternative (cross code) number:
CA2569143
256-9143
2569143
CA2569143
256-9143
2569143
TRUCK ENGINE,
Compatible equipment models: 2569143:
For full view, you need register
Information:
Barrier Control Panel (BCP)
Illustration 1 g06019698
(1) BCP
(2) BCP shutdown reset switch
(3) BCP shutdown switch
(4) BCP status indicator panel (if equipped)
Illustration 2 g06031167
(4) BCP status indicator panel (if equipped)
(5) BCP power indicator
(6) BCP machine barrier indicator
(7) BCP personnel barrier indicator
(8) BCP shutdown switch indicatorBCP (1) is at each entry to the operations area. There can be one or more BCPs depending on the site configuration.Note: The BCP may be equipped with status indicator panel (4). Status indicator panel (4) indicates that BCP (1) has power and that each system is armed.
BCP Shutdown Reset Switch (2) - Depress BCP shutdown reset switch (2) to arm the AIS.Note: Depress and hold BCP shutdown reset switch (2) for 2 seconds to send an enable signal to the Machine Automation System (MAS). The AIS will only be armed if all barriers are armed and BCP shutdown reset switch (2) pressed after any closed barrier has been tripped.
BCP Shutdown Switch (3) - Depress BCP shutdown switch (3) to disarm the Area Isolation System (AIS). When BCP shutdown switch (3) is pressed, the AIS will be disarmed. Turn BCP shutdown switch (3) clockwise to reset.Operator Station Shutdown Switch
Illustration 3 g06019902
Typical example
(9) Operator station shutdown switch
(10) Operator station shutdown reset switch
Operator Station Shutdown Switch (9) OFF position - Use operator station shutdown switch (9) to shutdown all machines in all autonomous controlled areas. Move operator station shutdown switch (9) to the OFF position to disarm the AIS.
Operator Station Shutdown Reset Switch (10) - Turn operator station shutdown switch (9) clockwise to enable the AIS. Press operator station shutdown reset switch (10) to reset the operator station.Note: The AIS will only be armed if all barriers are armed. BCP shutdown reset switch (2) on BCP (1) must be pressed after any closed barrier has been tripped.
Illustration 1 g06019698
(1) BCP
(2) BCP shutdown reset switch
(3) BCP shutdown switch
(4) BCP status indicator panel (if equipped)
Illustration 2 g06031167
(4) BCP status indicator panel (if equipped)
(5) BCP power indicator
(6) BCP machine barrier indicator
(7) BCP personnel barrier indicator
(8) BCP shutdown switch indicatorBCP (1) is at each entry to the operations area. There can be one or more BCPs depending on the site configuration.Note: The BCP may be equipped with status indicator panel (4). Status indicator panel (4) indicates that BCP (1) has power and that each system is armed.
BCP Shutdown Reset Switch (2) - Depress BCP shutdown reset switch (2) to arm the AIS.Note: Depress and hold BCP shutdown reset switch (2) for 2 seconds to send an enable signal to the Machine Automation System (MAS). The AIS will only be armed if all barriers are armed and BCP shutdown reset switch (2) pressed after any closed barrier has been tripped.
BCP Shutdown Switch (3) - Depress BCP shutdown switch (3) to disarm the Area Isolation System (AIS). When BCP shutdown switch (3) is pressed, the AIS will be disarmed. Turn BCP shutdown switch (3) clockwise to reset.Operator Station Shutdown Switch
Illustration 3 g06019902
Typical example
(9) Operator station shutdown switch
(10) Operator station shutdown reset switch
Operator Station Shutdown Switch (9) OFF position - Use operator station shutdown switch (9) to shutdown all machines in all autonomous controlled areas. Move operator station shutdown switch (9) to the OFF position to disarm the AIS.
Operator Station Shutdown Reset Switch (10) - Turn operator station shutdown switch (9) clockwise to enable the AIS. Press operator station shutdown reset switch (10) to reset the operator station.Note: The AIS will only be armed if all barriers are armed. BCP shutdown reset switch (2) on BCP (1) must be pressed after any closed barrier has been tripped.